Note: Ingredients listed on restricted chemical lists
EC/CAS
618-498-9/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
75-<100%
General Information
Version
6 (Replaced 5
Revision date
2016-05-26
Product name
KIILTO PRO D4 - T1106
1.2.1 Relevant identified uses
Adhesive
1.2.2. Uses advised against
All uses not specified in this section or in section 7.3
Emergency telephone
+358 (0)800 147 111
Icons in SDS
Company Information
company name
KIILTO OY
e-mail address of the competent person responsible for the Safety Data Sheet
productsafety@kiilto.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Hazard statements
Acute Tox. 4: H332 - Harmful if inhaled. Carc. 2: H351 - Suspected of causing cancer. Eye Irrit. 2: H319 - Causes serious eye irritation. Resp. Sens. 1: H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin Irrit. 2: H315 - Causes skin irritation. Skin Sens. 1: H317 - May cause an allergic skin reaction. STOT RE 2: H373 - May cause damage to organs through prolonged or repeated exposure (Inhalation). STOT SE 3: H335 - May cause respiratory irritation.
Precautionary statements
P102: Keep out of reach of children. P280: Wear protective gloves/protective clothing/eye protection. P284: In case of inadequate ventilation wear respiratory protection P302+P352 IF ON SKIN Gently wash with plenty of soap and water P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Supplemental label elements
SECTION 2: HAZARDS IDENTIFICATION (continued) EUH204: Contains isocyanates. May produce an allergic reaction.
Additional information
As from 24 August 2023 adequate training is required before industrial or professional use. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.
2.3 Other hazards
Product fails to meet PBT/vPvB criteria Endocrine-disrupting properties: The product fails to meet the criteria.
