Note: Ingredients listed on restricted chemical lists
EC/CAS
203-988-3/112-59-4
Name of the chemical
2-(2-hexyloxyethoxy)ethanol
Concentration
3.0-5.0%
EC/CAS
231-131-3/7440-22-4
Name of the chemical
Silver
Concentration
1.0-3.0%
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
1.0-3.0%
General Information
Version
5
Revision date
2015-09-11
Product name
EM907 Lead Free Solder Paste
Emergency telephone
(800) 424-9300, +703 527 3887
Icons in SDS
Company Information
company name
Kester Inc
e-mail address of the competent person responsible for the Safety Data Sheet
EHS_Kester@kester.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H319, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
NFPA Rating Classification of the substance or mixture
Hazard pictograms
GHS07
Hazardous Ingredients
Rosin Hexyl diglycol
Hazard statements
Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation.
Precautionary statements
Wear protective gloves / eye protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN: Wash with plenty of soap and water. Store in a well-ventilated place. Keep cool. Dispose of contents/container in accordance with local/regional/national/international regulations. (Contd. of page 1)
Classification system
NFPA ratings (scale 0 - 4) Health = 1 1 Fire = 1 1 0 Reactivity = 0 HMIS-ratings (scale 0 - 4) HEALTH *1 Health = *1 FIRE 1 Fire = 1 REACTIVITY 0 Reactivity = 0
PBT Substances
Not applicable
vPvB Substances
Not applicable * 3: COMPOSITION OF MIXTURE Description: Mixture of the substances listed below with nonhazardous additions. CAS No. Description % Range CAS: 7440-31-5 TIN (Sn) 85-100% EINECS: 231-141-8 Rosin Skin Sens. 1, H317 3.0-5.0% CAS: 112-59-4 Hexyl diglycol Eye Dam. 1, H318 1.0-3.0% EINECS: 203-988-3 Acute Tox. 4, H302; Acute Tox. 4, H312 CAS: 7440-22-4 SILVER (Ag) 1.0-3.0% EINECS: 231-131-3 CAS: 7440-50-8 COPPER (Cu) ^^ EINECS: 231-159-6 Additional information: ^^ See attached product table This product will be heated to a temperature of 217C (Celsius) during soldering. All volatile substances will evaporate and not remain on the finished circuit board. *
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 GHS07 Skin Irrit. 2 H315 Causes skin irritation. Eye Irrit. 2A H319 Causes serious eye irritation. STOT SE 3 H335 May cause respiratory irritation.
