951 Flux Pen

Hazard statements (CLP)

H225, H302, H312, H334, H335, H336

Code

Statements

H225

Highly Flammable liquid and vapour

SECTION 2: Hazards identification

NFPA Rating Classification of the substance or mixture

Hazard pictograms

GHS02 GHS07 GHS08 (Contd. of page 1)

Signal word

Danger

Hazardous Ingredients

ethanol Isopropanol Aliphatic ketone methanol

Hazard statements

Highly flammable liquid and vapor. Harmful if swallowed or in contact with skin. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness.

Precautionary statements

Keep away from heat/sparks/open flames/hot surfaces. No smoking. Wear protective gloves / eye protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. In case of fire Use for extinction CO2, powder or water spray Collect spillage. Absorb liquid components with liquid-binding material. Store in a well-ventilated place. Keep cool. Dispose of contents/container in accordance with local/regional/national/international regulations.

Classification system

NFPA ratings (scale 0 - 4) Health = 1 3 Fire = 3 1 0 Reactivity = 0 HMIS-ratings (scale 0 - 4) HEALTH 1 Health = 1 FIRE 3 Fire = 3 REACTIVITY 0 Reactivity = 0

PBT Substances

Not applicable

vPvB Substances

Not applicable * 3: COMPOSITION OF MIXTURE Description: Mixture of the substances listed below with nonhazardous additions. CAS No. Description % Range CAS: 64-17-5 ethanol Flam. Liq. 2, H225 55-70% EINECS: 200-578-6 Carc. 1A, H350 CAS: 67-63-0 Isopropanol Flam. Liq. 2, H225 10-25% EINECS: 200-661-7 Eye Irrit. 2A, H319; STOT SE 3, H336 (Contd. of page 2) Aliphatic ketone Flam. Liq. 3, H226 STOT SE 3, H336 CAS: 67-56-1 methanol Flam. Liq. 2, H225 5-10% EINECS: 200-659-6 Acute Tox. 2, H330 STOT SE 1, H370 Proprietary organic acids Eye Irrit. 2A, H319 CAS: 108-10-1 4-methylpentan-2-one Flam. Liq. 2, H225 1.0% EINECS: 203-550-1 Acute Tox. 3, H331 Carc. 2, H351 Eye Irrit. 2A, H319; STOT SE 3, H335 CAS: 7732-18-5 Water 3.0-5.0% EINECS: 231-791-2 Additional information: This solder product does not contain any Substance of Very High Concern (SVHC) on the European Chemicals Agency (ECHA) candidate list. This product will be heated to a temperature of 217C (Celsius) during soldering. All volatile substances will evaporate and not remain on the finished circuit board. *

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) No 1272/2008