145 Soldering Fiux

Hazard statements (CLP)

H225, H319, H335, H336

Code

Statements

H225

Highly Flammable liquid and vapour

SECTION 2: Hazards identification

NFPA Rating Classification of the substance or mixture

Hazard pictograms

GHS02 GHS07

Signal word

Danger

Hazardous Ingredients

lsopropanol! Rosin

Hazard statements

H225 Highly flammable liquid and vapor. H319 Causes serious eye irritation. H335-H336 May cause respiratory irritation. May cause drowsiness or dizziness. (Contd. on page 2) US J es a @ . Printing Date 08/20/2015 Version number 8 Reviewed On 05/20/2015 Trade name: 145 Soldering Flux | (Contd. of page 1)

Precautionary statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P284 in case of inadequate ventilation wear respiratory protection. P280 Wear protective gloves/protective clothing/eye protection/face protection. P264 Wash thoroughly after handling. P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/ shower. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P370+P378 In case of fire Use for extinction CO2, powder or water spray P390 Absorb spillage to prevent material damage. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Classification system

NFPA ratings (scale 0 - 4) Health = 1 Fire = 3 Reactivity = 0 HMIS-ratings (scale 0 - 4) HEALTH Health = 1 FIRE Fire = 3 Reactivity = 0

PBT Substances

Not applicable

vPvB Substances

Not applicable | 3: COMPOSITION OF MIXTURE | Description: Mixture of the substances listed below with nonhazardous additions. CAS No. Description % Range CAS: 67-63-0 lsopropanol ® Flam. Lig. 2, H225 70-85% EINECS: 200-661-7 & Eye Irrit. 2A, H319; STOT SE 3, H336 CAS: 8050-09-7 Rosin & Skin Sens. 1, H317 25-40% EINECS: 232-475-7 Additional information: This product will be heated to a temperature of 217C (Celsius) during soldering. All volatile substances will evaporate and not remain on the finished circuit board. us — (Contd. on page 3) Printing Date 08/20/2015 Version number 8 Reviewed on 05/20/2015 Trade name: 145 Soldering Flux (Contd. of page 2) |

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) No 1272/2008