Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
10-25
General Information
Revision date
2014-06-18
Product name
Stelcar 9135 - Powder
1.2.1 Relevant identified uses
Wear and Corrosion Resistant Welding Consumable. For use in industrial installations only
1.2.2. Uses advised against
None reasonably foreseeable
Emergency telephone
CHEMTREC +1-703-527-3887 (INTERNATIONAL
Icons in SDS
Company Information
company name
Kennametal Inc.
e-mail address of the competent person responsible for the Safety Data Sheet
k-corp-product.safety@kennametal.com
GHS Information
Signal word
DANGER
Section 2
2.1 Classification of the substance or mixture
Skin sensitization Category 1 Carcinogenicity Category 2 Specific target organ toxicity (repeated exposure) Category 1
2.2 Label elements
Emergency Overview DANGER
Hazard statements
May cause allergy or asthma symptoms or breathing difficulties if inhaled • May cause an allergic skin reaction • Suspected of causing cancer • Causes damage to organs through prolonged or repeated exposure • Harmful to aquatic life with long lasting effects • Avoid breathing dust/fume/gas/mist/vapors/spray • Wash thoroughly after handling and before eating or drinking • May cause sensitization by skin contact • Vapors may be irritating to eyes, nose, throat, and lungs • Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea Appearance metallic Powder Physical State solid Odor none
Precautionary statements
Obtain special instructions before use IF exposed or concerned: Get medical advice/attention Disposal Dispose of contents/container to an approved waste disposal plant
Prevention
Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Do not get in eyes, on skin, or on clothing Do not breathe dust/fume/gas/mist/vapors/spray Use only outdoors or in a well-ventilated area Wear respiratory protection In case of inadequate ventilation wear respiratory protection Contaminated work clothing should not be allowed out of the workplace Wear protective gloves
Response
Specific measures (see .? on this label) Specific treatment is urgent (see supplemental first aid instructions on this label) Skin Immediately call a POISON CENTER or doctor/physician IF ON SKIN: Gently wash with plenty of soap and water Remove/Take off immediately all contaminated clothing Wash contaminated clothing before reuse If skin irritation or rash occurs: Get medical advice/attention Inhalation IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing Immediately call a POISON CENTER or doctor/physician Ingestion IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell Rinse mouth
Storage
Store locked up. Store in a well-ventilated place. Keep container tightly closed.
2.3 Other hazards
Welding Hazards CAUTION. Welding will create fumes which may be toxic. If welding is performed on plated or coated materials such as galvanised or painted steel, excessive fume may be produced which contains additional hazardous components, and may result in metal fume fever or other health effects. The product and work surface will be hot during and after welding. Electric shock can kill. Arc Rays can injur eyes and burn skin. Fire Hazard. Incorrect or unsafe use of the welding comsumables may result in injury to health and property. Radiation from the welding arc can cause burns to the skin and damage to the eyes.
Further information
Harmful to aquatic life with long lasting effects. Unknown Aquatic Toxicty 4.725% of the mixture consists of ingredient(s) of unknown toxicity