LUCALOR RESIN

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 T2T200 Ciassification of ixture

Potential health effects

Irritation: Possible irritation of respiratory system (by dust inhalation). Skin contact: Cantact with the product, when handled at high temperatures, can cause serious burns.

Other physicochemical hazards

in the presence of an ignition source: Dust may form explosive mixture in air. At high temperature Thermal decomposition giving toxic and corrosive products Decompesition products: See chapter 10 Other

Results of PBT and vPvB assessment

This information is not required.

2.1 Classification of the substance or mixture

5 ixture Classification (Regulation (EC) No 4272/2008): Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. 3/E 2.2. Label elements Label elements (REGULATION (EC) No 1272/2008): This substance does not require a labei., geod00 2.3. Other hazards Potential health effects: Irritation: Possible irritation of respiratory system (by dust inhalation). Skin contact: Cantact with the product, when handled at high temperatures, can cause serious burns. Physical and chemical hazards: in the presence of an ignition source: Dust may form explosive mixture in air. At high temperature : Thermal decomposition giving toxic and corrosive products Decompesition products: See chapter 10 Other: Results of PBT and vPvB assessment: This information is not required. 3. COMPOSITION/INFORMATION ON INGREDIENTS 3.1.Substances 19, Rue Jacqueline Auriol KEN ONE 69008 LYON - FRANCE Quick-FDS [197 76-45965-23385-01 04 79] - 2020-07-01 ~ 12:46:05 6.4. Reference to other sections: None. 7. HANDLING AND STORAGE 7.1. Precautions for safe handling: Technical measures/Precautions: Storage and handling precautions applicable to products: Solid. DUST FORMING, forming EXPLOSIVE mixtures with air(In the presence of an ignition source). Provide appropriate exhaust ventilation at machinery. Provide self-contained breathing apparatus nearby. Provide showers, eye-baths. Provide electrical earthing of equipment. Safe handling advice: At all stages of the operation, do not exceed the temperature at which decomposition into toxte and corrosive products will occur. Avoid creating dust. Wear a dust mask and safety glasses/goggles if necessary. Prohibit all sources of sparks and ignition - Do not smoke. Avoid accumulation of static charges during transfers in metallic systems. Ensure all equipment is electrically grounded before beginning transfer operations. Use suitable methods of discharge and handling to prevent dust generation. Only use safety equipment. Wash down interior wails of silo before entering. Possible release of traces of residual monomer. In case of unexpected or premature stoppage of mixing or conversion machines : Turn off the heat source. Remove the product. Wear a self-contained breathing apparatus (if necessary). In case of entry into storage areas : Monitor the atmosphere (oxygen and dust levels). Follow the safety instructions. Hygiene measures: Remove and wash contaminated clothing before re-use. Avoid contact with the skin and the eyes. Avoid breathing dust. Wash hands after handling. Remove contaminated clothing and protective equipment before entering eating areas. 7.2. Conditions for safe storage, including any incompatibilities: Store away from moisture and heat to maintain the technical properties of the product. Store protected from all ignition sources. Provide earthing and safe electrical equipment. Do not store above: 60 °C Packaging material: Recommended: Paper bags, Flexible packaging, In bulk : stainless steel, alurninium, reinforced plastic To be avoided: Unprotected steel 7.3. Specific end uses: None. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control parameters: Exposure Limit Values (dust) 692652