Note: Ingredients listed on restricted chemical lists
EC/CAS
68476-86-8
Name of the chemical
Petroleum gases, liquefied, sweetened
Concentration
30-40
EC/CAS
9002-84-0
Name of the chemical
Polytetrafluoroethylene
Concentration
1-10
General Information
Revision date
2021-03-13
Product name
SLIKENE DRY PTFE LUBE
1.2.1 Relevant identified uses
Dry Lubricant
Manufacturer Name
Kano Laboratories, LLC
Icons in SDS
Company Information
company name
Kano Laboratories, LLC
GHS Information
Signal word
Danger!
Section 2
GHS / HAZCOM 2012 Classification
Health Physical Skin Irritation Category 2 Flammable Aerosol Category 2 Specific Target Organ Toxicity – Single Exposure Gas Under Pressure: Compressed Gas Category 3 (CNS)
Aspiration hazard
Category 1
2.2 Label elements
Danger! Flammable aerosol. Contains gas under pressure; may explode if heated. Causes skin irritation. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. Keep away from heat, sparks, open flames, and hot surfaces. No smoking. Do not spray on an open flame or other ignition source. Pressurized container. Do not pierce or burn, even after use. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves. IF SWALLOWED: Immediately call a POISON CENTER. Do NOT induce vomiting. IF ON SKIN Wash with plenty of soap and water. If skin irritation occurs Get medical attention. Take off contaminated clothing and wash it before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER if you feel unwell. In case of fire: Use carbon dioxide, dry chemical or foam to extinguish. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Store in a well-ventilated place. Store locked up. Dispose of contents and container in accordance with local and national regulations.