Note: Ingredients listed on restricted chemical lists
EC/CAS
1310-73-2
Name of the chemical
sodium hydroxide
Concentration
N/A
General Information
Revision date
2018-04-14
Product name
SPLIT EQUIPMENT CLEANER
1.2.1 Relevant identified uses
Industrial Cleaning Compound
Icons in SDS
Company Information
company name
Kaady Chemical Corp
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H320, H335
Hazard statements
Code
Statements
H320
Causes eye irritation
Section 2
2.1 Classification of the substance or mixture
GHS07 STOT SE 3 H335 May cause respiratory irritation. Eye Irrit. 2B H320 Causes eye irritation.
2.2 Label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS07
Hazardous Ingredients
Silicic acid, sodium salt
Hazard statements
H320 Causes eye irritation. H335 May cause respiratory irritation.
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P262 Do not get in eyes, on skin, or on clothing. P264 Wash thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves / eye protection / face protection. P281 Wear personal protective equipment/face protection. P301+P330+P331 If swallowed: Rinse mouth. Do NOT induce vomiting. P302+P350 IF ON SKIN: Gently wash with plenty of soap and water. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 Call a poison center/doctor if you feel unwell. P321 Specific treatment (see supplementary first aid instructions on this Safety Data Sheet). P363 Wash contaminated clothing before reuse. P403+P235 Store in a well-ventilated place. Keep cool. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. · Unknown acute toxicity: This value refers to knowledge of known, established toxicological or ecotoxicological values. 1.8 % of the mixture consists of component(s) of unknown toxicity.
Classification system
NFPA/HMIS Definitions 0-Least, 1-Slight, 2-Moderate, 3-High, 4-Extreme · NFPA ratings (scale 0 - 4) Health = 1 1 Fire = 1 1 0 Reactivity = 0 · HMIS-ratings (scale 0 - 4) HEALTH 1 Health = 1 FIRE 1 Fire = 1 REACTIVITY 0 Physical Hazard = 0
2.3 Other hazards
None known *
