Note: Ingredients listed on restricted chemical lists
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
0-50%
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
0-12% 0-25% 0-6% 0-4%
General Information
Revision date
2020-12-08
Product name
K-Bin Dryblend: All grades beginning with the prefix, KBD-, followed by alphanumeric code for grade and color
Product Synonyms
PVC dryblend
Chemical name
Rigid PVC Compound; Mixture of polyvinyl chloride resin, CAS 9002-86-2, and other ingredients
CAS No.
9002-86-2
1.2.1 Relevant identified uses
Industrial Uses, May be molded or extruded into various articles
Manufacturer Name
K-Bin, Inc
Icons in SDS
Company Information
company name
K-Bin, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H232, H341, H351, H360, H373, H412
Hazard statements
Code
Statements
H232
May ignite spontaneously if exposed to air
Section 2
SECTION 2: Hazards identification
Classification of Mixture H232 combustible dust Suspended airborne dust could form explosive mixture with air This mixture has not been evaluated as a whole. Polyvinyl chloride (PVC) may contain trace amounts (less than 1.5 ppm, but typically less than 0.5 ppm) of vinyl chloride monomer, CAS # 75-01-4. Vinyl chloride monomer or VCM is a known carcinogen. This mixture may also contain trace amounts of the following chemicals as residual monomers or residual process or product constituents. 4-Vinyl Cyclohexene, CAS No. 100-40-3 1,3-Butadiene, CAS No. 106-99-0 Styrene, CAS No. 100-42-5 Silicon Dioxide (quartz), CAS No. 14808-60-7 Butyl Acrylate, CAS No. 141-32-2 Methyl Methacrylate, CAS No. 80-62-6 Methane, CAS No. 74-82-8 Divinylbenzene, CAS No. 1321-74-0 tert-Butyl Alcohol, CAS No. 75-65-0 n-Dodecyl mercaptan, CAS No. 80-62-6 Ethyl Acrylate, CAS No. 140-88-5 Sulfur Dioxide, CAS 7446-09-5 Benzene, methyl (Toluene), CAS No. 108-88-3 Users should take the necessary precautions during melt processing to ensure compliance with all applicable regulations concerning potential exposure to VCM and processing fumes. PVC dryblend may cause irritation to the eyes or skin and moderate allergic dermatitis. Inhalation may result in respiratory irritation. In the absence of specific toxicological studies, take precautions to prevent exposure due to inhalation and ingestion. Various hazards may be associated with individual ingredients that may be present in this mixture. Hazard symbols and descriptions for those ingredients are given below. GHS07 GHS05 GHS08
Hazard statements
H315 Causes skin irritation; H317 May cause allergic skin reaction; H319 Causes serious eye irritation: H232 Combustible dust; H341 suspected of causing genetic effects; H351 Suspected of causing cancer (Inhalation); H360 Suspected of damaging fertility or the unborn child; H373; May cause damage to organs through repeated or prolonged exposure; H412 Harmful to aquatic life with long lasting effect
Precautionary statements
P261 Avoid breathing dust; P264 Wash thoroughly after handling; P280 Wear protective gloves, clothing, and eyewear; P305+P351+P338 If in eyes, rinse with water, remove contacts; continue rising; P308+P313 If exposed or concerned, get medical attention; P363 Wash contaminated clothing before reuse; P391+P501 collect spillage and dispose of contents/container in accordance with all appropriate regulations; P210 Keep away from heat, sparks, open flames, and hot surfaces-No smoking; P240 Ground/bond container and receiving equipment