Note: Ingredients listed on restricted chemical lists
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
0-20%
EC/CAS
201-607-5/85-44-9
Name of the chemical
Phthalic anhydride
Concentration
<0,15%
General Information
Version
05/04/2022
Revision date
2022-02-15
Product name
Junckers Rustic Oil
1.2.1 Relevant identified uses
Oil treatment of wood
1.2.2. Uses advised against
No special
Icons in SDS
Company Information
company name
Junckers Industrier A/S
e-mail address of the competent person responsible for the Safety Data Sheet
productsafety@junckers.dk
GHS Information
Signal word
Not applicable
Section 2
SECTION 2: Hazards identification
According to Regulation (EC) No 1272/2008 [CLP Classification of the substance or mixture
Hazard pictograms
Not applicable.
Signal word
Not applicable.
Hazard statements
Not applicable.
Precautionary statements
General -
Prevention
-
Response
-
Storage
-
Disposal
-
Hazardous Ingredients
No special.
Additional information
EUH066, Repeated exposure may cause skin dryness or cracking. EUH208, Contains Phthalic anhydride. May produce an allergic reaction. EUH210, Safety data sheet available on request. Additional warnings Cloths etc. used to apply the product can self-ignite. Place used cloths in an airtight and non-flammable container (e.g. a jam jar or a metal can with a lid). Dispose of in accordance with national waste regulations. This mixture/product does not contain any substances considered to meet the criteria classifying them as PBT and/or vPvB. ▼VOC VOC content: ≤ 460 g/L MAXIMUM VOC CONTENT (Phase II, category A/i (SB): 500 g/L)
2.1 Classification of the substance or mixture
Not classified according to Regulation (EC) No 1272/2008 (CLP). 2.2. Label elements Hazard pictogram(s) Not applicable. Signal word Not applicable. Hazard statement(s) Not applicable. Safety statement(s) General - Prevention - Response - Storage - Disposal - Hazardous substances No special. 2.3. Other hazards Additional labelling EUH066, Repeated exposure may cause skin dryness or cracking. EUH208, Contains Phthalic anhydride. May produce an allergic reaction. EUH210, Safety data sheet available on request. Additional warnings Cloths etc. used to apply the product can self-ignite. Place used cloths in an airtight and non-flammable container (e.g. a jam jar or a metal can with a lid). Dispose of in accordance with national waste regulations. This mixture/product does not contain any substances considered to meet the criteria classifying them as PBT and/or vPvB. ▼VOC VOC content: ≤ 460 g/L MAXIMUM VOC CONTENT (Phase II, category A/i (SB): 500 g/L) SECTION 3: Composition/information on ingredients ▼3.2. Mixtures Product/substance Identifiers % w/w Classification Note Hydrocarbons, C12-C15, CAS No.: 20-35% EUH066 n-alkanes, isoalkanes, < 2 Asp. Tox. 1, H304 % aromatics EC No.: 940-727-9 REACH: 01-2120083064-61 Index No.: Titanium dioxide CAS No.: 13463-67-7 0-20% EC No.: 236-675-5 REACH: 01-2119489379-17 Index No.: Hydrocarbons, C11-C12, CAS No.: 5-15% EUH066 isoalkanes, < 2 % Flam. Liq. 3, H226 aromatics EC No.: 918-167-1 Asp. Tox. 1, H304 REACH: 01-2119472146-39 Index No.: Hydrocarbons, C11-C13, CAS No.: 3-5% EUH066 isoalkanes, < 2 % Asp. Tox. 1, H304 aromatics EC No.: 920-901-0 REACH: 01-2119456810-40 Index No.: Hydrocarbons, C11-C14, CAS No.: 3-5% EUH066 isoalkanes, cyclics, < 2 % Asp. Tox. 1, H304 aromatics EC No.: 927-285-2 REACH: 01-2119480162-45 Index No.: Phthalic anhydride CAS No.: 85-44-9 <0,15% Acute Tox. 4, H302 (ATE: 1530.00 mg/kg) EC No.: 201-607-5 Skin Irrit. 2, H315 Skin Sens. 1, H317 REACH: Eye Dam. 1, H318 Index No.: 607-009-00-4 Resp. Sens. 1, H334 STOT SE 3, H335 ----- See full text of H-phrases in section 16. Occupational exposure limits are listed in section 8, if these are available. Other information The titanium dioxide contained in the product is not classified as Carc. 2;H351 in accordance with Annex VI, note 10 in Regulation (EC) No. 1272/2008 of the European Parliament and of the Council. SECTION 4: First aid measures 4.1. Description of first aid measures General information In the case of accident: Contact a doctor or a casualty ward - bring along the label or this safety data sheet. Contact a doctor if in doubt about the injured person’s condition or if the symptoms persist. Never give an unconscious person water or other drink. Inhalation Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her. Skin contact IF ON SKIN: Wash with plenty of water and soap. Remove contaminated clothing and shoes. Ensure to wash exposed skin thoroughly with water and soap. DO NOT use solvents or thinners. If skin irritation occurs: Get medical advice/attention. Eye contact Upon irritation of the eye: Remove contact lenses and open eyes widely. Flush eyes with water or saline water (20- 30 °C) for at least 5 minutes. Seek medical assistance and continue flushing during transport. Ingestion Provide plenty of water for the person to drink and stay with him/her. In case of malaise, seek medical advice immediately and bring the safety data sheet or label from the product. Do not induce vomiting, unless recommended by the doctor. Have the person lean forward with head down to avoid inhalation of or choking on vomited material. Burns Not applicable. 4.2. Most important symptoms and effects, both acute and delayed This product contains substances that may trigger an allergic reaction in already sensitized persons. Sensitisation: This product contains substances, which may produce an allergic reaction through inhalation. The allergic reaction typically takes place within an hour after exposure. The reaction results in an inflammatory reaction to the lungs. 4.3. Indication of any immediate medical attention and special treatment needed No special. Information to medics Bring this safety data sheet or the product label. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media: Alcohol-resistant foam, carbon dioxide, powder, water mist. Unsuitable extinguishing media: Waterjets should not be used, since they can spread the fire. 5.2. Special hazards arising from the substance or mixture Fire will result in dense smoke. Exposure to combustion products may harm your health. Closed containers, which are exposed to fire, should be cooled with water. Do not allow fire-extinguishing water to enter the sewage system and nearby surface waters. If the product is exposed to high temperatures, e.g. in the event of fire, dangerous decomposition compounds are produced. These are: Carbon oxides (CO / CO2) 5.3. Advice for firefighters Fire fighters should wear appropriate personal protective equipment. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures No specific requirements. 6.2. Environmental precautions Avoid discharge to lakes, streams, sewers etc. 6.3. Methods and material for containment and cleaning up Use sand, sawdust, soil, vermiculite or similar to collect liquid material. Subsequently, place in a suitable waste container. To the extent possible cleaning is performed with normal cleaning agents. Avoid use of solvents. 6.4. Reference to other sections See section 13 “Disposal considerations” on handling of waste. See section 8 "Exposure controls/personal protection" for protective measures. SECTION 7: Handling and storage 7.1. Precautions for safe handling Cloths etc. used to apply the product can self-ignite. Place used cloths in an airtight and non-flammable container. Smoking, drinking and consumption of food is not allowed in the work area. See section 8 "Exposure controls/personal protection" for information on personal protection. 7.2. Conditions for safe storage, including any incompatibilities Containers that have been opened must be carefully resealed and kept upright to prevent leakage.