Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
EC/CAS
108-10-1
Name of the chemical
4-methylpentan-2-one; isobutyl methyl ketone (MIBK)
Concentration
N/A
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
N/A
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
N/A
General Information
Revision date
2012-09-27
Product name
ACRYLITHANE HS2 SG EXXON TAN P-1
Chemical name
Acrylic Urethane Enamel
Icons in SDS
Company Information
company name
JONES-BLAIR Company
GHS Information
Signal word
WARNING!
Section 2
SECTION 2: Hazards identification
EMERGENCY OVERVIEW: WARNING! May cause allergic skin reaction. Flammable liquid and vapor. Causes eye irritation. Vapor harmful. Harmful if swallowed.
Principle Routes of Exposure
Inhalation • Eye contact • Skin contact • Ingestion • Skin absorption Target Organs Potentially • Respiratory Tract Affected by Exposure: • Eyes • Central nervous system • Skin • Kidneys • Liver • Blood
Medical Conditions Generally Aggravated by Exposure
Respiratory disorders, including but not limited to asthma and bronchitis. • Eye irritation when/if dust or spray mist is generated. • Skin disorders. • Eye disorders. • Liver disease • Kidney disease • Immediate (Acute) Health Effects by Route of Exposure: Inhalation Irritation: Inhalation of dusts produced during cutting, grinding or sanding of this product may cause irritation of the respiratory tract. Causes nose and throat irritation. Causes lung irritation. Inhalation Toxicity: Vapor harmful. May affect the brain or nervous system causing dizziness, headache or nausea. Skin Contact: Can cause moderate skin irritation. Skin Absorption: May be harmful if absorbed through skin. Eye Contact: Causes eye irritation. Ingestion Toxicity: Harmful if swallowed. Aspiration of material into the lungs can cause chemical pneumonitis which can be fatal. Long-Term (Chronic) Health Effects: Carcinogenicity: Cancer hazard: Contains Crystalline Silica, which can cause cancer. Risk of cancer depends on duration and level of exposure to dust generated from sanding surfaces or spray mists.
Contains
Titanium Dioxide which is listed by IARC as possibly carcinogenic to humans (Group 2B). This listing is based on inadequate evidence with respect to humans and sufficient evidence in experimental animals. Possible cancer hazard. Contains ethylbenzene which may cause cancer based on animal data. (Risk of cancer depends on duration and level of exposure.) Reproductive and Xylene may cause adverse reproductive and/or developmental effects. Pregnant Developmental Toxicity: women may be at an increased risk from exposure. Contains Methyl Ethyl Ketone, which in animal studies has shown to cause harm to the fetus only at exposure levels that harm the pregnant animal. The relevance of these findings to humans is uncertain. Mutagenicity: Xylene has been shown to be positive in mutagenicity assays. Inhalation: Overexposure may cause lung damage. NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Potential chronic health
of Warning Contains Butoxy Ethyl Acetate which may cause blood disorders and kidney Exposure: damage based on animal data.