SOLDERING PASTE

Hazard statements (CLP)

H302, H314, H319, H350, H410

Code

Statements

H302

Harmful if swallowed

2.1 Classification of the substance or mixture

Acute Tox. 4 * Skin Corr. 1B Aquatic Acute 1 Aquatic Chronic 1 Eye Irrit. 2 Carc 1B Acute Tox. 4 * Skin Corr. 1B Aquatic Acute 1 Aquatic Chronic 1 Eye Irrit. 2 Carc 1B

2.2 Label elements

ZINC CHLORIDE & AMMONIUM CHLORIDE DANGER H Codes: H302, H314, H319, H410, H350 Harmful if swallowed Harmful if inhaled Causes severe skin burns and eye damage May cause cancer Very toxic to aquatic life with long lasting effects P Codes: P264, 270, 201, 202, 281, 308+313, 280, 301+312, 330, 501, 260, 301+330+331, 303+361+353+310, 363, 304+340, 321, 405, 273, 305+351+338+310, 337+313 Avoid breathing dust/mist/vapors/fumes/spray. Do not get in eyes, on skin, or on clothing. Use in a well ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate ventilation use respiratory protection. Do not eat, drink or smoke when using this product. IF SWALLOWED Rinse mouth. DO NOT induce vomiting. Immediately call a POISON CENTER/Doctor. IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water/shower. Get medical advice/attention if you feel unwell. IF INHALED: Remove victim to to fresh air and keep comfortable for breathing. Get medical advice/attention if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call POISON CENTER/Doctor. Wash thoroughly after use. Wash contaminated clothing before reuse. Store in a closed corrosive resistant container, with corrosive resistant liner, in cool dry place. Avoid release to the environment. Dispose of contents/container in accordance with specified local/regional/national/international regulations for disposal. Keep out of the reach of children. Read label and SDS prior to use. 3. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous Component CAS # OSHA TWA ACIGH TWA Other limits % + Zinc Chloride 7646-85-7 1mg/M3 NE 39 % Ammonium Chloride 12125-02-9 10mg/M3 Part Number(s): 10-1207 As Zinc Ammonium Chloride NE Petrolatum 8009-03-8 5mg/M3 mist NE Only those ingredients listed in this section have been determined to be hazardous as defined in 29CFR 1910.1200. An ingredient marked with an asterisk(*) is also listed in 29CFR 1910.1200(D) #4 as a known or suspected cancer hazard. + denotes a chemical regulated as toxic by the Environmental Protection Agency (EPA) as outlined in 40CFR Part 372 (section 313) JOHNSON MANUFACTURING COMPANY To comply with 29CFR 1910.1200 OSHA's Hazard Communication Standard Johnson's Soldering Paste, 05-00 1. PRODUCT AND COMPANY INFORMATION Johnson Manufacturing Company 114 Lost Grove Road Princeton IA 52768 Emergency Telephone 1-(563)-289-5123 CHEMTREC AFTER HOURS 1-(800)-424-9300 Revised 1/1/2015 by JMC Product Safety ZINC CHLORIDE & AMMONIUM CHLORIDE DANGER H Codes: H302, H314, H319, H410, H350 Harmful if swallowed Harmful if inhaled Causes severe skin burns and eye damage May cause cancer Very toxic to aquatic life with long lasting effects 1801 Morgan Street MSDS Number: 123 Rockford, IL 61102 Revision Date: 04/21/2015 P Codes: P264, 270, 201, 202, 281, 308+313, 280, 301+312, 330, 501, 260, 301+330+331, 303+361+353+310, 363, 304+340, 321, 405, 273, 305+351+338+310, Phone: (815) 968-9661 Supersedes Date: 08/27/2012 337+313 Fax: (815) 968-9731 Avoid breathing dust/mist/vapors/fumes/spray. Do not get in eyes, on skin, or on clothing. Use in a well ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate ventilation use respiratory protection. Do not eat, drink or smoke when using this product. www.gcelectronics.com IF SWALLOWED Rinse mouth. DO NOT induce vomiting. Immediately call a POISON CENTER/Doctor. IF ON SKIN (or hair) Take off immediately all keep comfortable for breathing. Get medical advice/attention if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contaminated clothing. Rinse skin with water/shower. Get medical advice/attention if you feel unwell. IF INHALED: Remove victim to to fresh air and contact lenses, if present and easy to do. Continue rinsing. Immediately call POISON CENTER/Doctor. Wash thoroughly after use. Wash contaminated clothing before reuse. Store in a closed corrosive resistant container, with corrosive resistant liner, in cool dry place. Avoid release to the environment. Dispose of contents/container in accordance with specified local/regional/national/international regulations for disposal. Keep out of the reach of children. Product Name: SOLDERING PASTE Read label and SDS prior to use. 3. COMPOSITION/INFORMATION ON INGREDIENTS