Note: Ingredients listed on restricted chemical lists
EC/CAS
7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
N/A
EC/CAS
231-100-4
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
N/A
General Information
Revision date
2019-05-02
Product name
Data on the product: Trade name
Manufacturer Name
Clarios
Icons in SDS
Company Information
company name
johnson & johnson
e-mail address of the competent person responsible for the Safety Data Sheet
Axel.Lesch@clarios.com
Section 2
SECTION 2: Hazards identification
No hazards in case of an intact battery and observation of the instructions for use. Lead acid batteries have two significant characteristics: - They contain diluted sulphuric acid, which may cause severe acid burns, when the material is touched. - During the charging process they develop hydrogen gas and oxygen, which under certain circumstances may turn into an explosive mixture. For this reason, batteries are marked with the following hazard symbols 1) No smoking, no naked flames, no sparks Shield eyes Corrosive (Battery acid) Note operating instructions Explosive gas Keep away from children’s reach 1) The hazard symbols on the left side correspond to ISO 7010. The hazard symbols on the right side correspond to the European industry standard EN 50342-1 for starter batteries. In dependence of the respective normative background the hazard symbols shown here are suitable to fulfil the safety-related requirements. A marking of batteries after GHS CLP-regulation is not required. Note: Do not clean batteries with dry wishers, use only wet wishers, due to electrostatic charge
