Note: Ingredients listed on restricted chemical lists
EC/CAS
28553-12-0
Name of the chemical
Di-isononyl phthalate(DINP),5
Concentration
5-10
EC/CAS
1317-80-2
Name of the chemical
Titanium dioxide in powder form containing 1 % or more of particles with aerodynamic diameter ≤ 10 μm
Concentration
1-5
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
<1
General Information
Revision date
2008-05-30
Product name
JM TPO Membrane Polyurethane Caulk
1.2.1 Relevant identified uses
This product is used as a sealing agent on termination bars and fasteners at parapet walls and other termination points. It is not intended to be used as a seam sealant
Emergency telephone
800-424-9300 (Chemtrec, In English
Icons in SDS
Company Information
company name
Johns Manville
Section 2
SECTION 2: Hazards identification
Emergency Overview Breathing vapors from this product may cause irritation of the upper respiratory tract, fatigue, weakness, drowsiness, and headache. Allergic or asthma-type reactions may occur following sensitization to isocyanates. Inhalation Inhalation at levels above the occupational exposure limit could cause respiratory sensitization and risk of serious damage to the respiratory system. The onset of respiratory symptoms may be delayed for several hours after exposure. Skin This product is irritating to the skin and may cause sensitization. Ingestion This product is not intended to be ingested or eaten under normal conditions of use. If ingested, seek medical attention. Eyes This product is irritating to the eyes and may cause sensitization.
Principle Routes of Exposure
Exposure) Inhalation, skin, and eye contact. Target Organs Skin, eye, lungs, central nervous system (CNS), respiratory system, kidney, liver.
Medical Conditions Generally Aggravated by Exposure
Pre-existing respiratory diseases or conditions, especially asthma or chemically-induced asthma. Prior exposure and sensitization to isocyanate, or other chemical sensitizers may cause asthmatic, or allergic reactions.
