WT% TLV (mg/m*) = PEL(mg/m*)

Jnited States Gypsum Company

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating
Safety risk rating
Environmental risk rating

General Information

Product name

WT% TLV (mg/m*) = PEL(mg/m*)

Product Synonyms

Limestone

Chemical name

Aqueous mixture of limestone and latex

CAS No.

1317-65-3

1.2.1 Relevant identified uses

NIOSH/MSHA-approved respiratory protection when necessary 0 = Minimal Hazard 1 = Slight Hazard

Icons in SDS

Company Information

company name

Jnited States Gypsum Company

Section 2

Appearance/Odor

Off white paste; low odor. «Boiling Point: 212°F elting/Freezing Point: 32°F Specific Gravity (H20 = 1): 1.6 pH Range: 7-8.5 Vapor Pressure: 17 @ 20°F Volatile Organic Compoundsy. 54 W/ biobal Safety Management, 1-813-435-5161 MSDS NO. 06115 Lignitv ght Ae aTpose isnt Page 2 of 4 SHEETROCK Brand Compound Plus 3™ Ready-Mixed Varies. Check usage and/or product specification data. Hardening Time: Be ne FIRE AND EXPLOSION HAZARD DATA Flash Point (Method Used): Noncombustible Use extinguishing media appropriate for surrounding fire. Extinguishing Media: Special Fire Fighting Procedures: None Unusual Fire and Explosion Hazards: None Special Fire Fighting Protective Equipment: None eee URS ge ele SECTION Vi70 Fee ore ees

Acute Health Hazards

Nuisance dust can be released during dry sanding of this product. Eye, skin, nose, throat, and upper respiratory irritation can occur with prolonged dust exposure. EFFECTS OF OVEREXPOSURE: ACUTE: EYES: Direct contact can cause mechanical irritation of eyes. If burning, redness, itching, pain or other symptoms persist or develop, consult physician. SKIN: Direct, prolonged or repeated contact with the skin may cause irritation. May dry skin. Rubbing of this produc against the skin can result in abrasions. Rinse with water until free of material to avoid abrasions, then wash skin thoroughly with mild soap and water. If irritation persists, consult physician. INHALATION: Inhalation of dust from this product may irritate the nose, throat, lungs, and upper respiratory tract. Persons subjected to large amounts of this dust will be forced to leave area because of nuisance conditions such as coughing, sneezing and nasal irritation from dust. Labored breathing may occur after excessive inhalation. If respiratory symptoms persist, consult physician. INGESTION: No known effects. CHRONIC: EYES: None known. SKIN: None known. INHALATION: This product may contain small amounts of vinyl acetate monomer, vapors of which have been shown to cause tumors in the respiratory tract of laboratory animals. Chronic overexposure to vinyl acetate is not expected to occur during normal handling and use of this product, Vinyl acetate has been shown to cause irritation and cancer in inhalation studies with laboratory animals. Test levels of 600ppm over a lifetime cause an increase in tumors in the respiratory tract of the test animals. 200ppm caused irritation. No tumors were observed in the animals exposed at SOppm or lower. There is no evidence of adverse effects to humans exposed to levels at or below the TLV. Chronic overexposure to respirable crystalline silica may result in lung disease (i.e., silicosis) and/or lung cancer. INGESTION: No Known effects. EMERGENCY AND FIRST AID PROCEDURES: EYES: Flush thoroughly with plenty of water for 15 minutes to remove particles. If irritation persists, consult physician SKIN: Rinse with water, then wash with mild soap and water. A commercially available hand lotion may be used to treat dry skin areas. If skin has become cracked, take appropriate action to prevent infection and promote healing. If irritation persists, consult physician. INHALATION: Remove to fresh air. Leave the area of dust exposure and remain away until coughing and other symptoms subside. Other measures are usually not necessary, however, if conditions warrant, contact physician. INGESTION: No harmful effects expected. No specific recommendation. If gastric disturbance occurs, call physician. Obtained by Global Safety Management, 1-813-435-5161 —————— MSDS NO. 06115 Compound Plus 3™ Ready-Mixed Page 3 of 4 ili “ARGET ORGANS: Eyes, skin, and respiratory system. MEDICAL CONDITIONS WHICH MAY BE AGGRAVATED: Pre-existing upper respiratory and lung diseases such as, but not limited to, bronchitis, emphysema and asthma.

Principle Routes of Exposure

Inhalation; Eye and/or Skin contact. CARCINOGENICITY OF INGREDIENTS: MATERIAL IARC NTP Respirable Crystalline Silica Group 1 Anticipated Acetaldehyde 2B Anticipated Vinyl Acetate Monomer 2B Not Listed Vinyl acetate monomer and acetaldehyde, if present, are trace components of the vinyl acetate polymer. Quantities of monomer have not been measured, but would be expected to be less than 0.1 Wt. %. USG has measured exposure levels of respirable crystalline silica at jobsites during ready-mixed joint compound applications and sanding for this product. Results of this industrial hygiene testing for USG joint compounds showed no detection of respirable crystalline silica following NIOSH Method 7500. Industrial hygiene testing on this product for formaldehyde exposure during mixing and application of ready-mixed joint compound showed no detection of formaldehyde. In June, 1997, the International Agency for Research on Cancer (IARC) classified crystalline silica (quartz and cristobalite) as a human carcinogen. In making the overall evaluation, the IARC Working Group noted that carcinogenicity in humans was not detected in all industrial circumstances studies. Carcinogenicity may be dependent on inherent characteristics of the crystalline silica or on external factors affecting its biological activity or distribution o Aiea ‘ts polymorphs. IARC states that crystalline silica inhaled in the form of quartz or cristobalite from occupational sources in carcinogenic to humans (Group 1). REACTIVITY DATA STABILITY: Stable. INCOMPATIBILITY: None known. HAZARDOUS POLYMERIZATION: Will not occur. HAZARDOUS DECOMPOSITION: CO, would be produced at high temperatures with the decomposition of limestone (~800°C). Stable under normal temperature and pressure. Product contains low level of organic volatiles which may be emitted or released in application processes involving the use of heat. Vent all ovens and process vessels to the outside atmosphere. Thermal decomposition will produce 1,0, CO, CO, and acetic acid. Could produce vinyl acetate monomers when temperature is above 175°C.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.