Jet-Ag 5% Peracetic Acid

Hazard statements (CLP)

H242, H290, H314, H335, H401, H410

Code

Statements

H242

Heating may cause a fire

SECTION 2: Hazards identification

According to Hazardous Product Regulations

Physical hazards

Organic peroxides Type F Corrosive to metal Category 1

Health hazards

Acute toxicity (Oral) Category 4 Acute toxicity (Inhalation) Category 4 Acute toxicity (Dermal) Category 4 Skin corrosion Sub-category 1A Serious Eye Damage/Eye Irritation Category 1 Specific Target Organ Toxicity - Category 31. Single Exposure Target Organs 1. Respiratory system

Environmental hazards

Acute hazards to the aquatic Category 2 Chronic hazards to the aquatic Category 1

Signal word

Danger

Hazard statements

Heating may cause a fire. May be corrosive to metals. Harmful if swallowed, in contact with skin or if inhaled. Causes severe skin burns and eye damage. May cause respiratory irritation. Toxic to aquatic life. Very toxic to aquatic life with long lasting effects.

Prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep only in original packaging. Ground and bond container and receiving equipment. Avoid breathing dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well- ventilated area. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection.

Response

IF SWALLOWED Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water [or shower]. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Take off contaminated clothing and wash it before reuse. In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. Absorb spillage to prevent material damage. Collect spillage.

Storage

Store in a well-ventilated place. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect from sunlight. Store at temperatures not exceeding … oC/…oF. Store separately.

Disposal

Dispose of contents/ container to an approved waste disposal plant.

2.3 Other hazards

Risk of decomposition in contact with incompatible substances, impurities, metals, alkalis, reducing agents. Danger of decomposition if exposed to heat Release of oxygen may support combustion. This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.