Note: Ingredients listed on restricted chemical lists
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
N/A
EC/CAS
9002-84-0
Name of the chemical
Polytetrafluoroethylene
Concentration
N/A
General Information
Revision date
2017-04-27
Product name
LynCar Proseal Plus
Product Synonyms
Power Seal Plus
Chemical name
Alkaline Earth Carbonate and PTFE mixture
1.2.1 Relevant identified uses
Alkaline Earth Carbonate and PTFE mixture
Manufacturer Name
J.C. Whitlam Manufacturing Company
Emergency telephone
800-255-3924 Available 24 hours
Icons in SDS
Company Information
company name
J.C. Whitlam Manufacturing Company
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H316, H320, H402
Hazard statements
Code
Statements
H316
Causes mild skin irritation
Section 2
OSHA HCS Classification
Skin Corrosion/Irritation, Category 3 Eye Damage/Irritation, Category 2B Hazardous to the aquatic environment, acute hazard, Category 3 Signal Word and Hazard statements Warning — Causes mild skin irritation H316 Causes eye irritation H320 Harmful to aquatic life H402
Precautionary statements
P332 + P313 If skin or eye irritation occurs: Get medical advice/attention P305+P338 If in eyes, check for and remove any contact lenses if present and easy to do so. P351 Rinse eyes cautiously with tepid water for several minutes. P337 If eye irritation persists, continue rinsing. P273 Avoid release to the environment – if this is not the intended use. P501 Dispose of contents in accordance with Federal, State, Provincial, and local regulations Inhalation: Not applicable Ingestion: Unlikely to be toxic by ingestion. Provide first aid (see Section 4) Skin contact: P264 Wash hands thoroughly after handling. May cause mechanical irritation from prolonged or repeated contact. Eye contact: May cause mechanical eye irritation. Carcinogenic: Titanium dioxide is listed by the IARC as group 2B, see Section 11.
