TankWeld Kit, Part A Resin

J-B Weld Company LLC

Revision date : 2022-12-06

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

25068-38-6

Name of the chemical

4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane

Concentration

60-100%

Listed in

EC/CAS

2425-79-8

Name of the chemical

1,4-butanediol bis(2,3-epoxypropyl)ether

Concentration

10-30%

EC/CAS

1302-78-9

Name of the chemical

bentonite

Concentration

0.1-1.0%

General Information

Version

1.2

Revision date

2022-12-06

Product name

TankWeld Kit, Part A Resin

Product Synonyms

2110 Tank Weld Part A

Chemical name

Not Applicable

1.2.1 Relevant identified uses

Use according to manufacturer"s directions

Emergency telephone

800-222-1222

Icons in SDS

GHS07 M007 M008 M009 M010 M016

Company Information

company name

J-B Weld Company LLC

e-mail address of the competent person responsible for the Safety Data Sheet

info@JBWeld.com, info@jbweld.com

GHS Information

Signal word

Warning

Hazard Codes

Hazard statements (CLP)

H315, H317, H319, H335

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

SECTION 2: Hazards identification

Signal word

Warning

Hazard statements

H319 Causes serious eye irritation. H335 May cause respiratory irritation. Page 1 continued... H315 Causes skin irritation. H317 May cause an allergic skin reaction. Hazard(s) not otherwise classified Not Applicable

Prevention

P271 Use only outdoors or in a well-ventilated area. P261 Avoid breathing mist/vapours/spray. P280 Wear protective gloves, protective clothing, eye protection and face protection. P264 Wash all exposed external body areas thoroughly after handling. P272 Contaminated work clothing must not be allowed out of the workplace.

Response

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 Call a POISON CENTER/doctor/physician/first aider/if you feel unwell. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P302+P352 IF ON SKIN: Wash with plenty of water and soap. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P332+P313 If skin irritation occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse.

Storage

P405 Store locked up. P403+P233 Store in a well-ventilated place. Keep container tightly closed.

Disposal

P501 Dispose of contents/container to authorised hazardous or special waste collection point in accordance with any local regulation.

2.1 Classification of the substance or mixture

of this SDSs are NOT to be used to fill in the NFPA 704 diamond. Blue = Health Red = Fire Yellow = Reactivity White = Special (Oxidizer or water reactive substances) Classification Serious Eye Damage/Eye Irritation Category 2A, Specific Target Organ Toxicity - Single Exposure (Respiratory Tract Irritation) Category 3, Skin Corrosion/Irritation Category 2, Sensitisation (Skin) Category 1A Label elements Hazard pictogram(s)

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.