Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
30-40 15-25
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
10-20
General Information
Version
2.2
Revision date
2023-08-22
Product name
PlasticBonder Tan - Part A
Product Synonyms
50133 PlasticBonder Tan - Part A (Resin)
1.2.1 Relevant identified uses
Use according to manufacturer"s directions
Emergency telephone
800-222-1222
Icons in SDS
Company Information
company name
J-B Weld Company LLC
e-mail address of the competent person responsible for the Safety Data Sheet
info@JBWeld.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Signal word
Danger
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. Page 1 continued... H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure. (Skin) (Dermal) Hazard(s) not otherwise classified Not Applicable
Prevention
P201 Obtain special instructions before use. P260 Do not breathe mist/vapours/spray. P261 Avoid breathing mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves, protective clothing, eye protection and face protection. P284 [In case of inadequate ventilation] wear respiratory protection. P202 Do not handle until all safety precautions have been read and understood. P264 Wash all exposed external body areas thoroughly after handling. P272 Contaminated work clothing must not be allowed out of the workplace.
Response
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P308+P313 IF exposed or concerned: Get medical advice/ attention. P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor/physician/first aider. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 Call a POISON CENTER/doctor/physician/first aider/if you feel unwell. P314 Get medical advice/attention if you feel unwell. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P302+P352 IF ON SKIN: Wash with plenty of water. P332+P313 If skin irritation occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse.
Storage
P405 Store locked up. P403+P233 Store in a well-ventilated place. Keep container tightly closed.
Disposal
P501 Dispose of contents/container to authorised hazardous or special waste collection point in accordance with any local regulation.
2.1 Classification of the substance or mixture
NFPA 704 diamond Note: The hazard category numbers found in GHS classification in section 2 of this SDSs are NOT to be used to fill in the NFPA 704 diamond. Blue = Health Red = Fire Yellow = Reactivity White = Special (Oxidizer or water reactive substances) Skin Corrosion/Irritation Category 2, Sensitisation (Skin) Category 1A, Serious Eye Damage/Eye Irritation Category 2A, Sensitisation Classification (Respiratory) Category 1, Specific Target Organ Toxicity - Single Exposure (Respiratory Tract Irritation) Category 3, Carcinogenicity Category 2, Specific Target Organ Toxicity - Repeated Exposure Category 2