Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
>=30-<40%
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
>=10-<15% 254504001-5709 >=10-<15% 254504001-5596 >=1.5-<5%
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
>=0.1-<0.5%
General Information
Revision date
2014-11-19
Product name
Plastic Bonder
supplier name
J-B WELD COMPANY, LLC
Emergency telephone
800-424-9300, 703-527-3887, 800-222-1222
Icons in SDS
Company Information
company name
J-B WELD COMPANY, LLC
e-mail address of the competent person responsible for the Safety Data Sheet
info@jbweld.com
Section 2
SECTION 2: Hazards identification
OSHA Emergency Overview Appearance: liquid WARNING! MAY AFFECT THE CENTRAL NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. MAY CAUSE ALLERGIC SKIN OR RESPIRATORY REACTION.
Principle Routes of Exposure
Inhalation, Skin absorption, Skin contact, Eye Contact, Ingestion, This product is an inert plastic when fully cured, and as such, is nonhazardous. Exposure to unreacted chemicals can occur when handling the individual components in pails or when using cartridges from the time of dispensing until the mixed material has cured. The mixed material is actually curing as it is dispensed in an increasingly viscous form, making it unlikely to present an inhalation hazard. The semi-viscous mixture does not flow like a liquid when dispensed, thus minimizing the possibility of accidental skin contact. Eye contact Can cause eye irritation. Symptoms include stinging, tearing, redness, and swelling of eyes. Skin contact Can cause skin irritation. Symptoms may include redness and burning of skin, and other skin damage. Skin contact with adhesive that is not fully cured may cause an allergic skin reaction or other skin irritation. Ingestion Swallowing small amounts of this material during normal handling is not likely to cause harmful effects. Swallowing large amounts may be harmful. Inhalation This product contains 4,4'-diphenylmethane diisocyanate (MDI). Breathing MDI may cause an allergic respiratory reactionwith difficult breathing and chest pain. The onset of respiratory symptoms may be delayed for several hours after exposure. Previously sensitized individuals should avoid exposure to all diisocyanates because exposure to even very small amounts can cause asthma-like attacks in these individuals. Repeated and prolonged exposure to large amountsof talc dust may cause mild lung inflammation. Symptoms are not expected at air concentrations below the recommended exposure limits, if applicable (see Section 8.). Q Page 2/14
Medical Conditions Generally Aggravated by Exposure
Preexisting disorders of the following organs (or organ systems) may be aggravated by exposure to this material:, Skin, Upper respiratory tract, lung (for example, asthma-like conditions) Symptoms Signs and symptoms of exposure to this material through breathing, swallowing, and/or passage of the material through the skin may include:, stomach or intestinal upset (nausea, vomiting, diarrhea), irritation (nose, throat, airways), runny nose, Cough, sneezing, bronchitis, Headache, chest pain, Difficulty in breathing, pneumonia, lung edema (fluid buildup in the lung tissue), Exposure to this product (or a component) may cause an allergic reaction (narrowing of the air passages of the lungs resulting in difficult breathing, tightness in the chest, coughing and wheezing) in some sensitive individuals. Other symptoms of an allergic reaction may include itchy and watery eyes, runny and stuffy nose, sweating, flushing, hives, rapid heart rate, and lowered blood pressure. Target Organs Overexposure to this material (or its components) has been suggested as a cause of the following effects in laboratory animals , nasal damage, lung damage, Overexposure to this material (or its components) has been suggested as a cause of the following effects in humans , effects on lung function Carcinogenicity Carbon black has been shown to cause cancer in laboratory animals. The relevance of this finding to humans is uncertain. It is listed as a carcinogen by The International Agency for Research on Cancer (IARC). Epidemiological studies of the incidence of cancer, cardiovascular or respiratory disease in workers in the carbon black producing industry have shown no significant health effects due to occupational exposure to carbon black. In a two-year inhalation study in rats, exposure to polymeric methylene bisphenylisocyanate (MDI) aerosol caused a significant increase in benign (noncarcinogenic) lung tumors, along with a single carcinogenic lung tumor, at the highest dose only (6 mg/m3). The tumors occurred along with irritation of the respiratory tract and the accumulation of a yellow material in the lungs. There was irritation only at 1.0 mg/m3 and no effect at 0.2 mg/m3. MDI is not listed as carcinogenic by the International Agency for Research on Cancer (IARC), the National Toxicology