Note: Ingredients listed on restricted chemical lists
EC/CAS
100-51-6
Name of the chemical
Benzyl Alcohol
Concentration
≥1-≤5
EC/CAS
919-30-2
Name of the chemical
3-aminopropyltriethoxysilane
Concentration
≥1-≤5
EC/CAS
111-40-0
Name of the chemical
2,2'-iminodi(ethylamine)
Concentration
≥0.1-≤1
General Information
Version
2.01
Revision date
2024-03-06
Product name
ClearWeld Syringe, Part B - Hardener
1.2.1 Relevant identified uses
Hardener for resins
1.2.2. Uses advised against
Reason See information supplied by the manufacturer
supplier name
J-B Weld Company
Emergency telephone
+1 (800) 535-5053, +1 (352) 323-3500, +1 (903) 885-7696
Icons in SDS
Company Information
company name
J-B Weld Company
e-mail address of the competent person responsible for the Safety Data Sheet
info@jbweld.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H314, H317
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage
Section 2
SECTION 2: Hazards identification
Signal word
Danger
Hazard statements
Harmful if swallowed, in contact with skin or if inhaled. Causes severe skin burns and eye damage. May cause an allergic skin reaction.
Prevention
Wear protective gloves, protective clothing and eye or face protection. Use only outdoors or in a well-ventilated area. Avoid breathing vapor. Do not eat, drink or smoke when using this product. Wash thoroughly after handling.
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor. IF SWALLOWED: Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a POISON CENTER or doctor. Wash contaminated clothing before reuse. IF ON SKIN: Call a POISON CENTER or doctor if you feel unwell. Wash with plenty of water. If skin irritation or rash occurs: Get medical advice or attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Storage
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
2.3 Other hazards
None known.
2.1 Classification of the substance or mixture
ACUTE TOXICITY (dermal) - Category 4 ACUTE TOXICITY (inhalation) - Category 4 SKIN CORROSION - Category 1B EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1