KINGCO DUCT LINER ADHESIVE

Non Hazardous Components

known at this time ====================================================================== SECTION III − PHYSICAL DATA ====================================================================== Appearance/Color: WHITE − OFF−WHITE Boiling Range: 212.øF Evaporation Rate: Slower than n−Butyl Acetate % Volatile Weight: 40.65% % Volatile Volume: Not Available Specific Gravity: 1.04648 Weight/Volume Measure: 8.71406 EPA Method 24 VOC: 0.6 g/L Photo Chem Reactive Only VOC: 0.4 ====================================================================== SECTION IV − FIRE AND EXPLOSION HAZARD DANGER ====================================================================== Flammability Class: IIIB Flash Range: Not Applicable Explosive Range: Not Applicable EXTINGUISHING MEDIA: Water spray, carbon dioxide, dry chemical or foam. SPECIAL FIREFIGHTING PROCEDURES: After water evaporates, remaining material will burn. Breathing apparatus when fighting fires in enclosed areas. UNUSUAL FIRE & EXPLOSION HAZARDS: Decomposition products may cause a health hazard. ====================================================================== SECTION V − HEALTH HAZARD DATA ====================================================================== PERMISSIBLE EXPOSURE LEVEL: SEE SECTION VIII. EFFECTS OF OVEREXPOSURE: INHALATION: Materials are low in volatility and therefore not likely to pose a problem. EYES: May cause minor irritation. SKIN: Not likely to be absorbed in toxic amounts. Avoid skin contact as much as possible; upon repeated contact, slight skin irritation may occur. INGESTION: None reported, not likely route of entry. FIRST AID: INHALATION: Get fresh air. EYES: Flush with water for at least 15 minutes. SKIN: Wash with mild soap and water; apply a mild cream. INGESTION: Small amounts are not expected to produce adverse

Potential health effects

Larger amounts should be recovered by aspiration. Call a physician. ====================================================================== SECTION VI − REACTIVITY DATA ====================================================================== Stability: This product is stable Hazardous Polymerization: Hazardous polymerization will not occur INCOMPATIBILITY: Strong acids or alkaline materials. CONDITIONS TO AVOID: None known. HAZARDOUS DECOMPOSITION PRODUCTS: Fumes, smoke, carbon monoxide, carbon dioxide in the case of incomplete combustion. ====================================================================== SECTION VII − SPILL OR LEAK PROCEDURES ======================================================================