Galmet Spraypaint Primer Aerosol

ITW POLYMERS & FLUIDS

Revision date : 2022-08-17

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07
Health risk rating 3
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

1330-20-7

Name of the chemical

Xylene

Concentration

20-30

Listed in

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

<10

Listed in

EC/CAS

14807-96-6

Name of the chemical

Talc

Concentration

<10

EC/CAS

67-64-1

Name of the chemical

acetone

Concentration

<5

EC/CAS

123-86-4

Name of the chemical

acetic acid, butyl ester

Concentration

<5

General Information

Version

8.1

Revision date

2022-08-17

Product name

Galmet Spraypaint Primer Aerosol

Product name

Galmet Spraypaint Primer Aerosol

Identification on the label/Trade name

AEROSOLS

Chemical name

Not Applicable

1.2.1 Relevant identified uses

Application is by spray atomisation from a hand held aerosol pack

Emergency telephone

+61 1800 951 288, +61 3 9573 3188

Icons in SDS

GHS02 GHS07 M008 M009 M010 M017 T017

Company Information

company name

ITW POLYMERS & FLUIDS

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H312, H315, H319, H332, H336, H402

Hazard statements

Code

Statements

H312

Harmful in contact with skin

Section 2

SECTION 2: Hazards identification

No 1272/2008 Classification of the substance or mixture

Signal word

Danger

Hazard statements

H222+H229 Extremely flammable aerosol. Pressurized container: may burst if heated. H312 Harmful in contact with skin. H315 Causes skin irritation. H319 Causes serious eye irritation. H332 Harmful if inhaled. H336 May cause drowsiness or dizziness. H402 Harmful to aquatic life.

Prevention

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P271 Use only outdoors or in a well-ventilated area.

Response

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 Call a POISON CENTER/doctor/physician/first aider/if you feel unwell. P337+P313 If eye irritation persists: Get medical advice/attention. P302+P352 IF ON SKIN: Wash with plenty of water and soap.

Storage

P405 Store locked up. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P403+P233 Store in a well-ventilated place. Keep container tightly closed.

Disposal

P501 Dispose of contents/container to authorised hazardous or special waste collection point in accordance with any local regulation.

2.1 Classification of the substance or mixture

HAZARDOUS CHEMICAL. DANGEROUS GOODS. According to the WHS Regulations and the ADG Code. Poisons Schedule Not Applicable Aerosols Category 1, Acute Toxicity (Dermal) Category 4, Skin Corrosion/Irritation Category 2, Serious Eye Damage/Eye Irritation Classification [1] Category 2A, Acute Toxicity (Inhalation) Category 4, Specific Target Organ Toxicity - Single Exposure (Narcotic Effects) Category 3, Hazardous to the Aquatic Environment Acute Hazard Category 3 Page 1 continued... 1. Classified by Chemwatch; 2. Classification drawn from HCIS ; 3. Classification drawn from Regulation (EU) No 1272/2008 - Legend

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.