12689 PC REARVIEW MIRROR ADHESIVE KIT PART 1

ITW Permatex Canada

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating
Safety risk rating
Environmental risk rating

General Information

Product name

12689 PC REARVIEW MIRROR ADHESIVE KIT PART 1

Icons in SDS

Company Information

company name

ITW Permatex Canada

Section 2

SECTION 2: Hazards identification

Component: POLYURETHANE METHACRYLATE Weight% LD50/oral/rat LC50/inhalation/rat ACGIH; TLV-TWA 30-50 not available not available RESIN (MIXTURE) IHYDROXYALKYL METHACRYLATE 27813-02-1 ALIPHATIC URETHANE METHACRYLATE 3290-92-4 ACRYLIC ACID '79-10-7 DIMETHYLBENZYL HYDROPEROXIDE 80-15-9 2-HYDROXYETHYL METHACRYLATE 868-77-9 20-40 11200 mg/kg not available <10 5660 uL/kg not available <5 33.5 mg/kg 3.6 mg/L/4H; 1202 ppm/4H 2 ppm <3 382 mg/kg 200 ppm/4H <3 5050 mg/kg not available lll. PHYSICAL DATA Physical State/Appearance Odour & Odour Threshold Specific Gravity Yellow liquid Sharp, irritating 1.1 Evaporation Rate Vapour Pressure Vapour Density Freezing Point pH Octanol/Water Coefficient Boiling Point Not determined <5 mmHg @ 24°C Heavier than air Does not apply >150°C/302°F IV. FIRE AND EXPLOSIVE DATA Recommended Extinguishing Media Carbon Dioxide, Dry Chemicals, Foam. Hazardous Combustion Products Sensitivity to Static Discharge Conditions of Flammability Flash Point/Range Autoignition Temperature Upper Explosive Limit Lower Explosive Limit Oxides of carbon Sensitivity to static discharge is not expected None anticipated. >95°C COC. Not determined Acrylic acid: 8.0% Acrylic acid: 2.0% V. REACTIVITY DATA Conditions Causing Chemical Instability None Materials to avoid Incompatible with strong bases and oxidizing agents Conditions of Reactivity High temperatures Hazardous Decomposition Products Carbon oxides VI. HAZARDS IDENTIFICATION Primary Routes of Exposure: Eye and skin contact, ingestion, inhalation 1 of 3 VI. HAZARDS IDENTIFICATION Existing Conditions Aggravated by Acrylic acid: Upper respiratory and lung diseases, dermatitis Exposure: Toxicity Information: (See Effects of Acute Exposure to Product) Effects of Acute Exposure: May cause severe eye irritation and moderate skin irritation. Possible inhalation irritant. May be harmful if swallowed. Effects of Chronic Exposure: May cause an allergic skin reaction. Irritancy of Product: Eye irritation may be severe. Sensitization to Product: (See Effects of Acute Exposure to Product) Carcinogenicity: (See Effects of Chronic Exposure to Product) Reproductive Toxicity: (See Effects of Chronic Exposure to Product) Teratogenicity: (See Effects of Chronic Exposure to Product) Mutagenicity: (See Effects of Chronic Exposure to Product) Toxicologically Synergistic Products: None known WHMIS Hazard Class: D2B TOXIC MATERIALS Vil. PREVENTATIVE MEASURES Personal Protection Eyes: Safety glasses. Skin: Neoprene or nitrile gloves recommended. Ventilation: Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction. Engineering Controls: In case of insufficient ventilation, wear an organic vapor respirator Spill Procedures: Maintain good ventilation. Take up with an inert absorbent. Store in a closed waste container until disposal. Protection of Man and Environment: Follow Canadian and local regulations for disposal. Handling Procedures and Equipment: Avoid breathing vapours. Use with adequate ventilation. Special Handling Information: Avoid prolonged breathing of vapor. Keep away from eyes. Avoid prolonged contact with skin. Do not smoke while using. Wash hands after use. Do not store at temperatures above 40 degrees C.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.