Devweld 530 Adhesive

ITW Performance Polymers

Revision date : 2023-09-08

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS02
Health risk rating 4
Safety risk rating 3
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

80-62-6

Name of the chemical

methacrylic acid, methyl ester

Concentration

30-60%

EC/CAS

79-41-4

Name of the chemical

methacrylic acid

Concentration

5-10%

General Information

Revision date

2023-09-08

Product name

Devweld 530 Adhesive

Emergency telephone

800-424-9300

Icons in SDS

GHS02 GHS07 M009 M010 M011 M017 T016

Company Information

company name

ITW Performance Polymers

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H225, H315, H317, H335

Hazard statements

Code

Statements

H225

Highly Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Physical hazards

Flammable liquids Category 2

Health hazards

Skin corrosion/irritation Category 2 Sensitization, skin Category 1 Specific target organ toxicity following single Category 3 respiratory tract irritation exposure

Environmental hazards

Not classified.

Signal word

Danger

Hazard statements

Highly flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. May cause respiratory irritation.

Prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing mist/vapours. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection.

Response

IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTRE/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. In case of fire: Use appropriate media to extinguish.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool. Store locked up.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations.

Additional information

45 % of the mixture consists of component(s) of unknown acute dermal toxicity. 45 % of the mixture consists of component(s) of unknown acute inhalation toxicity. 45 % of the mixture consists of component(s) of unknown acute hazards to the aquatic environment. 52.5 % of the mixture consists of component(s) of unknown long-term hazards to the aquatic environment.

2.3 Other hazards

Static accumulating flammable liquid can become electrostatically charged even in bonded and grounded equipment. Sparks may ignite liquid and vapour. May cause flash fire or explosion.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.