Note: Ingredients listed on restricted chemical lists
EC/CAS
128-37-0
Name of the chemical
2,6-di-tert-butyl-p-cresol
Concentration
2.5-10
EC/CAS
5124-30-1
Name of the chemical
4,4'-methylenedicyclohexyl diisocyanate
Concentration
1-5
EC/CAS
584-84-9
Name of the chemical
2,4-Diisocyanattoluol
Concentration
1-5 0.1-1
General Information
Revision date
2020-04-30
Product name
DEVCON Flexane High Performance Putty Resin
Manufacturer Name
ITW Performance Polymers
Icons in SDS
Company Information
company name
ITW Performance Polymers
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
Physical hazards
Flammable liquids Category 2
Health hazards
Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Sensitization, respiratory Category 1 Sensitization, skin Category 1A Carcinogenicity Category 2 Reproductive toxicity Category 2 Specific target organ toxicity, single exposure Category 3 respiratory tract irritation Specific target organ toxicity, single exposure Category 3 narcotic effects Specific target organ toxicity, repeated Category 2 exposure
Environmental hazards
Not classified. OSHA defined hazards Not classified.
Signal word
Danger
Hazard statements
Highly flammable liquid and vapor. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness. Suspected of causing cancer. Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe mist/vapors. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate ventilation wear respiratory protection.
Response
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled Remove person to fresh air and keep comfortable for breathing. If in eyes Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. If skin irritation or rash occurs Get medical advice/attention. If eye irritation persists Get medical advice/attention. If experiencing respiratory symptoms: Call a poison center/doctor. Take off contaminated clothing and wash it before reuse. In case of fire: Use appropriate media to extinguish.
Storage
Keep cool. Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwise Static accumulating flammable liquid can become electrostatically charged even in bonded and
Classified (HNOC)
grounded equipment. Sparks may ignite liquid and vapor. May cause flash fire or explosion.
Additional information
20% of the mixture consists of component(s) of unknown acute inhalation toxicity.