Note: Ingredients listed on restricted chemical lists
EC/CAS
128-37-0
Name of the chemical
2,6-di-tert-butyl-p-cresol
Concentration
3-<5
EC/CAS
5124-30-1
Name of the chemical
4,4'-methylenedicyclohexyl diisocyanate
Concentration
1-5
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
1-5
EC/CAS
584-84-9
Name of the chemical
2,4-Diisocyanattoluol
Concentration
1-5
General Information
Revision date
2023-07-31
Product name
DEVCON Flexane High Performance Putty Resin
Emergency telephone
800-424-9300
Icons in SDS
Company Information
company name
ITW Performance Polymers
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
Physical hazards
Flammable liquids Category 2
Health hazards
Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2 Sensitization, respiratory Category 1 Sensitization, skin Category 1 Carcinogenicity Category 2 Reproductive toxicity Category 2 Specific target organ toxicity following single Category 3 respiratory tract irritation exposure Specific target organ toxicity following single Category 3 narcotic effects exposure Specific target organ toxicity following Category 2 repeated exposure
Environmental hazards
Not classified.
Signal word
Danger
Hazard statements
Highly flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness. Suspected of causing cancer. Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Do not breathe mist/vapours. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. Wear respiratory protection.
Response
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. IF INHALED Remove person to fresh air and keep comfortable for breathing. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. If skin irritation or rash occurs Get medical advice/attention. If eye irritation persists Get medical advice/attention. If experiencing respiratory symptoms: Call a POISON CENTRE/doctor. Take off contaminated clothing and wash it before reuse. In case of fire: Use appropriate media to extinguish.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool. Store locked up.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Additional information
20 % of the mixture consists of component(s) of unknown acute inhalation toxicity.
2.3 Other hazards
Static accumulating flammable liquid can become electrostatically charged even in bonded and grounded equipment. Sparks may ignite liquid and vapour. May cause flash fire or explosion.
