Note: Ingredients listed on restricted chemical lists
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
EC/CAS
100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
General Information
Revision date
2015-01-27
Product name
POLYESTER RESIN KIT
Product Synonyms
Light Sand Body Filler (3L), Product Code: ABELS3, ABELS15
1.2.1 Relevant identified uses
Two part light weight polyester body filler. This MSDS refers to the (major) putty component
Emergency telephone
+61 3 9573 3112
Icons in SDS
Company Information
company name
ITW AAMTech
e-mail address of the competent person responsible for the Safety Data Sheet
info@aamtech.com.au
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H315, H319, H332
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
HAZARDOUS SUBSTANCE. DANGEROUS GOODS. According to the Criteria of NOHSC, and the ADG Code. Poisons Schedule S5 R36/38 Irritating to eyes and skin. [1] Flammable Liquid Category 3, Acute Toxicity (Inhalation) Category 4, Skin Corrosion/Irritation Category 2, Eye Irritation Category 2 1. Classified by Chemwatch; 2. Classification drawn from HSIS ; 3. Classification drawn from EC Directive 1272/2008 - Annex Legend: VI
Hazard statements
1] R20 Harmful by inhalation. R10 Flammable. 1. Classified by Chemwatch; 2. Classification drawn from HSIS ; 3. Classification drawn from EC Directive 1272/2008 - Annex Legend: VI H226 Flammable liquid and vapour H332 Harmful if inhaled H315 Causes skin irritation H319 Causes serious eye irritation
Signal word
WARNING
Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P271 Use only outdoors or in a well-ventilated area. P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
Response
P370+P378_2 In case of fire: Use alcohol resistant foam or fine spray/water fog for extinction. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue P305+P351+P338 rinsing. P312 Call a POISON CENTER/doctor/physician/first aider/if you feel unwell. P337+P313 If eye irritation persists: Get medical advice/attention.
Storage
P403+P235 Store in a well-ventilated place. Keep cool.
Disposal
P501 Dispose of contents/container to authorised chemical landfill or if organic to high temperature incineration
2.2 Label elements
Relevant risk statements are found in section 2 Indication(s) of Xn danger
Precautionary statements
S07 Keep container tightly closed. S09 Keep container in a well ventilated place. S13 Keep away from food, drink and animal feeding stuffs. S25 Avoid contact with eyes. S26 In case of contact with eyes, rinse with plenty of water and contact Doctor or Poisons Information Centre. S36 Wear suitable protective clothing. S37 Wear suitable gloves. S39 Wear eye/face protection. S40 To clean the floor and all objects contaminated by this material, use water and detergent. S46 If swallowed, seek medical advice immediately and show this container or label. S51 Use only in well ventilated areas. S56 Dispose of this material and its container at hazardous or special waste collection point. S64 If swallowed, rinse mouth with water (only if the person is conscious).
2.3 Other hazards
Skin contact may produce health damage*.
