Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
236-675-5
Name of the chemical
Titandioxid; [in Pulverform mit mindestens 1 % Partikel mit aerodynamischem Durchmesser ≤ 10 μm] (2020/217)
Concentration
N/A
General Information
Revision date
2020-07-01
Product name
White cement: i.active TECNO BIANCO; i.active ULTRA BIANCO
1.2.1 Relevant identified uses
Use description Formulation of
Icons in SDS
Company Information
company name
Italcementi S.p.A
e-mail address of the competent person responsible for the Safety Data Sheet
itc-reach@italcementi.it
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H318, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
Hazard categories
Hazard statement Skin irritation 2 H315: Causes skin irritation Serious eye damage / eye irritation 1 H318: Causes serious eye damage Skin sensitisation 1 B H317: May cause an allergic skin reaction Specific target organ toxicity (single exposure) 3 H335: May cause respiratory irritation Respiratory tract irritation
2.2 Label elements
In accordance with Regulation (EC) No. 1272/2008 (CLP)
Signal word
Warning
Hazard statements
H318: Causes serious eye damage H315: Causes skin irritation H317: May cause an allergic skin reaction H335: May cause respiratory irritation
Precautionary statements
P102: Keep out of reach of children. P280: Wear protective gloves / protective clothing /eye protection / face protection P305+P351+P338+P310 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call immediately a Poison Centre / doctor if you feel unwell. P302+P352+P333+P313 IF ON SKIN Wash with plenty of soap and water. If skin irritation or a rash occurs, get medical advice/attention. P261+P304+P340+P312 Avoid breathing dust. IF INHALED Remove victim to fresh air. Call a Poison Centre or doctor/physician if you feel unwell. P501: Dispose of product/container in accordance with applicable regulation.
2.3 Other hazards
When the mixture is mixed with water, for instance when making concrete or mortar, or when it becomes wet, a strongly alkaline solution is produced (high pH caused by the formation of calcium, sodium and potassium hydroxides). The mixture may irritate the eyes, the mucous system, the throat and the respiratory system and cause coughing. Frequent inhalation of the mixture over a long period of time increases the risk of developing lung diseases. Frequent contact between the mixture and moist skin (due to sweat or humidity) over a long period of time may cause irritation and/or dermatitis (Reference [4]). In case of prolonged contact with the skin, both the mixture and resulting pastes may cause skin sensitisation due to the presence of trace amounts of chromium VI salts. Where necessary, such an effect can be minimized by incorporating a special reducing agent to maintain the water-soluble chromium VI content to concentration rates below 0.0002% (2 ppm) on the total dry weight of cement, in compliance with the applicable legislation referred to in Section 5 (Reference [3]). If significant amounts are ingested, the mixture may cause ulcers in the digestive tract. Under normal conditions of use, the mixture does not pose any particular risk to the environment, provided that all recommendations given under Sections 6, 8, 12 and 13 below are followed. The mixture does not fulfil the criteria for PBT or vPvB in accordance with Annex XIIl of REACH (Regulation 1907/2006/EC).
