General Information
Revision date
2020-07-01
Product name
Quick-setting hydraulic binder
CAS No.
65997-15-1
1.2.1 Relevant identified uses
Use description Formulation of
Emergency telephone
Hospital University Foggia, 71122 Foggia - V.le Luigi Pinto, 1 - Tel. 0039-0881-732326
Icons in SDS
Company Information
company name
Italcementi S.p.A
e-mail address of the competent person responsible for the Safety Data Sheet
itc-reach@italcementi.it
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H318, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
Hazard categories
Hazard statement Skin irritation 2 H315: causes skin irritation Serious eye damage / eye irritation 1 H318: causes serious eye damage Skin sensitisation 1 B H317: may cause an allergic skin reaction STOT SE: Specific target organ toxicity (single 3 H335: may cause respiratory exposure) Respiratory tract irritation irritation
2.2 Label elements
In accordance with Regulation 1272/2008 (CLP)
Signal word
Danger
Hazard statements
H318 Causes serious eye damage H315 Causes skin irritation H317: May cause an allergic skin reaction H335: May cause respiratory irritation
Precautionary statements
P102 Keep out of the reach of children. P280: wear protective gloves / protective clothing /eye protection / face protection. P305+P351+P338+P310 IN CASE OF CONTACT WITH EYES rinse thoroughly with water for several minutes Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor / Poison Centre if you feel unwell. P302+P352+P333+P313 IN CASE OF CONTACT WITH SKIN wash thoroughly with soap and water. If skin irritation or a rash occurs, get medical advice/attention. P261+P304+P340+P312 Do not breathe dust. IN CASE OF INHALATION Move the exposed person to fresh air and keep them in a position that facilitates breathing. Call a doctor / Poison Centre if you feel unwell. P501: Dispose product/container in accordance to regulation.
Additional information
Skin contact with wet cement, fresh concrete or mortar may lead to irritation, dermatitis and burns. The products may damage objects made of aluminum or other base metals.
2.3 Other hazards
When the mixtures reacts with water, for instance when making concrete or mortar, or when the cement becomes wet, a strong alkaline solution is produced (high pH caused by the formation of calcium, sodium and potassium hydroxides). The mixture may irritate the eyes, the mucous system, the throat and the respiratory system and cause coughing. Frequent inhalation of cement dust or cement-containing mixtures over a long period of time increases the risk of developing lung diseases. Frequent contact between the mixture and moist skin (due to sweat or humidity) over a long period of time may cause irritation and/or dermatitis (Reference [4]). In case of prolonged contact with the skin, both the mixture and resulting pastes may cause skin sensitisation due to the presence of trace amounts of chromium VI salts. Where necessary, such an effect can be minimized by incorporating a special reducing agent to maintain the water-soluble chromium VI content to concentration rates below 0.0002% (2 ppm) on the total dry weight of cement, in compliance with the applicable legislation referred to in Section 15 (Reference [3]). If significant amounts are ingested, the mixture may cause ulcers in the digestive tract. Under normal conditions of use, the mixture does not pose any particular risk to the environment, provided that all recommendations given under Sections 6, 8, 12 and 13 below are carried out. The mixture does not meet the criteria for PBT or vPvB in accordance with Annex XIIl of REACH (Regulation 1907/2006/EC).
