General Information
Product name
Glass fabric Silicon Coated
Icons in SDS
Company Information
company name
ISOPARTNER AS
Section 2
Contains
Glass fibre Stainless steel Organic Binder <4% Vermiculite Description of the mixture Glass fabric coated with silicon Section 4: First aid measures 4.1 Description of first aid measures General In all cases of doubt seek medical advice Inhalation Not applicable Skin contact Wash hands with water and soap Eye Contact Remove contact lenses. rinse immediately with plenty of water for at least 15 min if symptoms persist seek medical Ingestion Not applicable Section 5: Fire-fighting measures 5.1 Extinguishing media Suitable extinguishing media Selected in relation to the surrounding fire, water, powder 5.2 Special dangers that substance or the mixture may result Fire and explosion hazard The product is not flammable. Only packaging Hazardous Combustion Products carbon dioxide CO2, Carbon monoxide CO chlorine compounds ( Fire in packaging ) 5.3 Advice for firefighters personal protective equipment Use supplied air respirator if product is involved in fire Section 6: Accidental emissions 6.1 Personal precautions, protective equipment and emergency procedures Security measures to protect personnel Use personal protective equipment as indicated in Section 8 6.2 Measures to protect environment Measures to protect environment The product should not be dumped in nature but collected and delivered according to agreement with local authorities 6.3 Methods for cleaning up Methods for cleaning up Collect mechanically. Collect in suitable containers and delivered to disposal as waste according. Section 13 6.4 Reference to other sections Other instructions See also section 8 and 13 Section 7: Handling and storage 7.1 Precautions for safe handling Handling Use protective equipment see Section 8 Avoid formation of dust. Ensure good ventilation. 7.2 Conditions for safe storage, including any incompatibilities
Storage
Store dry Further information about storage conditions Normal ventilation is usually adequate. 7.3 Special Applications Sepcial applications See section 1.2 Section 8: Exposure controls / personal protection 8.1 Control parameters Other information on limit values Contains no substances with occupational exposure limits. 8.2 Exposure in the workplace Occupational exposure in the Personal protective equipment should be chosen according to the CEN workplace standards and in discussion with the supplier of the personal protective equipment. Ensure adequate ventilation Respiratory Protection Use mask P2 dust formation Hand Protection Normally not necessary. Normal work gloves may be required especially sensitive people, and work that evokes fiberglass dust. Penetration Not applicable, since the product is a solid. Eye / face protection Eye Protection Use tight fitting goggles if dust is generated Skin Skin Protection Work clothes with long sleeves and long pants may be needed particularly sensitive people.
Further information
The given protection are suggested. Risk assessment (actual risk) may lead to other requirements Section 9: Physical and chemical properties 9.1 Information on basic physical and chemical properties State Solid Color Gray/red/white Smell None Comments, Odor Threshold None Comments PH None Melting temperatur 825°C Boiling point Not relevant Comment Not relevant Flammability Incombustible material Relative density Value: 2,6 Solubility in water Insoluble Autoflammablity No Decomposition temperature Value: ~200°C Comments For the organic coating. Has no significance for the product temperature Other physical and chemical properties Physical and chemical properties Filament diameter >=9 my Comments The product can continuously 260 ° C Section 10: Stability and reactivity 10.1 Reactivity Reactivity No reactivity danger 10.2 Chemical Stability Stability Stable under the prescribed storage and use conditions. 10.3 Possibility of hazardous reactions Possibility of hazardous reactions No dangerous reactions known 10.4 Conditions to avoid Conditions to avoid None known. 10.5 Materials to avoid Materials to avoid None known 10.6 Hazardous decomposition products Hazardous decomposition products No information Section 11: Toxicological Information 11.1 Information on toxicological effects Potential acute effects Breathing The dust at high concentrations may irritate throat and respiratory system and cause coughing Skin contact Dust may irritate the skin mechanically. Repeated skin contact may cause dermatitis. Eye contact Dust may irritate eyes mechanically Ingestion Not relevant Delay / Repeat Allergy The criteria for classification on the basis of the available data is not considered to be fulfilled. Carcinogenic, mutagenic and toxic to reproduction Carcinogenic The criteria for classification on the basis of the available data is not considered to be fulfilled Mutagenicity The criteria for classification on the basis of the available data is not considered to be fulfilled Teratogenicity The criteria for classification on the basis of the available data is not considered to be fulfilled Reproduction The criteria for classification on the basis of the available data is not considered to be fulfilled 12: Environmental Information 12:1 Toxicity Aquatic The product is not classified as dangerous for the environment. 12:2 Persistence and degradability
Physical hazards
Oxidising properties not specified