PCL-FRP-250HR Prepreg

SECTION 2: Hazards identification

Canadian WHMIS for the preparation: Class D, Division 2A – Very Toxic Material Causing Chronic Toxic Effects Class D, Division 2B – Toxic Material Causing Other Effects – Eye Irritation and Skin Sensitization EU PREPARATION CLASSIFICATION (1999/45/EC): Irritant (Xi), R36/37/38-43; Dangerous for the Environment (N), R51/53 EMERGENCY OVERVIEW: Inhalation of product particulates or of residual solvent vapors may be harmful. May cause skin sensitization. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. (continued)

Potential health effects

No information is available on this specific mixture as a whole. The information presented is based on each of the components present at concentrations greater than 1% (0.1 % for hazardous substances other than those classified as Xn, Xi, or category 3 carcinogens, mutagens or toxic for reproduction). May cause irritation of the eyes, skin and respiratory and digestive tracts. May cause skin sensitization. Long-term or repeated exposure may cause pneumoconiosis. This product contains less than one percent total residual solvents (acetone, methyl ethyl ketone, methanol, cyclohexanone). Exposure to residual vapors may cause eye, skin and respiratory tract irritation, and may have effects on the central nervous system. Dust generated during routine handling, machining, grinding, or sawing may cause mechanical irritation of skin, eyes, nose, and throat. Machining, grinding or sawing this material may generate harmful dusts. Continuous filament glass fiber is not considered fibrogenic; however, it is woven from E-Glass fibers which are listed by IARC as “special purpose glass fibers” and designated as “possibility of carcinogenic in humans.” See Section 8 for exposure controls. ROUTES OF ENTRY: Dermal: YES Inhalation: POSSIBLE Ingestion: SLIGHT Injection: POSSIBLE