Fetal Cell Count kit

Hazard statements (CLP)

H302, H315, H317, H318, H332, H335, H351

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

1272/2008 Classification of the substance or mixture There are no reported further health hazards for the product in the current formulation and applications. Only Reagent B of the product composition does contain a dangerous substance in amounts that need to be hazard labeled according to EC Regulation No

Hazard pictograms

Reagent B

Signal word

Reagent B: DANGER

Hazard statements

Reagent B: H302 Harmful if swallowed; H315 Causes skin irritation; H317 May cause an allergic skin reaction; H318 Causes serious eye damage; H332 Harmful if inhaled; H335 May cause respiratory irritation; H351 Suspected of causing cancer;

Precautionary statements

Reagent B: P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking; P261 Avoid breathing dust/fume/gas/mist/vapours/spray; P280 Wear protective gloves/protective clothing/eye protection/face protection; P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing; General P270 Do not eat, drink or smoke when using this product; P262 Do not get in eyes, on skin, or on clothing; P337+P313 If eye irritation persists: Get medical advice/attention; P280 Wear protective gloves/protective clothing/eye protection/face protection.

2.3 Other hazards

All reagents should be handled in accordance with good laboratory practices using appropriate precautions. In addition, handle all patient samples with appropriate precautions as described in “Biosafety in Microbial and Biomedical Laboratories”, 2nd ed., 1988. HHS Publication No. (CDC) 88-8395, Centers for Disease Control. There are no reported further health hazards for the product in the current formulation and applications. The product contain substances that may be hazardous when available in significant amounts and should be treated as potentially biohazardous. No toxic effects are to be expected when the product is handled appropriately. The product may enter the body through inhalation, ingestion, skin contact and eye contact. Sodium azide forms explosive compounds with heavy metals. Components of this product contain azide < 0,1% (w/v). Repeated contact of these components with lead and copper, commonly found in plumbing drains, should be avoided as this may result in the buildup of shock-sensitive compound. On disposal, flush with large amounts of water to prevent azide build-up.

2.1 Classification of the substance or mixture

There are no reported further health hazards for the product in the current formulation and applications. Only Reagent B of the product composition does contain a dangerous substance in amounts that need to be hazard labeled according to EC Regulation No. 1272/2008. All other components of the product contain substances that may be hazardous when available in significant amounts and should be treated as potentially biohazardous.