Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
6846-50-0
Name of the chemical
2,2,4-trimethyl-1,3-pentanediol diisobutyrate
Concentration
N/A
General Information
Revision date
2015-05-14
Product name
Two-Component Casting Urethane
Product Synonyms
MDI, ISO, “A” Component
Chemical name
Polymeric Diphenylmethane 4,4 Diisocyanate
1.2.1 Relevant identified uses
Two-Component Casting Urethane
Icons in SDS
Company Information
company name
IPS Polymer Systems, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H316, H317, H319, H333, H334, H335, H373
Hazard statements
Code
Statements
H316
Causes mild skin irritation
Section 2
SECTION 2: Hazards identification
WARNING Label
Hazard pictograms
Product contains Diphenylmethane Diisocyanate (MDI). Inhalation of MDI mists or vapors may cause respiratory irritation, breathlessness, chest discomfort and reduced pulmonary function. Overexposure well above the PEL may result in bronchitis, bronchial spasms, and pulmonary edema. Long-term exposure to isocyanates has been reported to cause lung damage, including reduced lung function which may be permanent, acute or chronic overexposure to Isocyanates may cause sensitization in some individuals, resulting in allergic respiratory reactions including wheezing, shortness of breath, and difficulty breathing. Avoid contact with skin and eyes. Direct skin or eye contact may cause irritation.
Principle Routes of Exposure
Inhalation, Skin, Ingestion, Eye
2.1 Classification of the substance or mixture
Rating Acute Toxicity- Harmful if Inhaled Category 4 Skin Corrosion/Irritation (Causes skin irritation) Category 2 Serious Eye Damage/Eye Irritation (Causes serious eye irritation) Category 2 Respiratory Sensitization (May cause allergy or asthma symptoms) Category 1 Specific Target Organ Toxicity (Respiratory Tract Irritant) Category 3
Hazard statements
H317 May cause an allergic skin reaction. H333 May be harmful if inhaled. H335 May cause respiratory irritation. H316 Causes mild skin irritation. H373 May cause damage to organs through prolonged or H319 Causes serious eye irritation. repeated exposure. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary statements
P304 + P340 IF INHALED: Remove victim to fresh air and P260 Do not breathe fumes/ mist/ vapors/ spray. keep at rest in a position comfortable for breathing. P280 Wear protective gloves/ protective clothing/ eye P305 + P351 + P338 IF IN EYES: Rinse cautiously with protection/ face protection. water for several minutes. Remove contact lenses if easy to P285 In case of inadequate ventilation wear respiratory do so protection. P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
