Polyurethane Coating 36081 Flat Gray

SECTION 2: Hazards identification

EMERGENCY OVERVIEW

2.1 Classification of the substance or mixture

Acute Toxicity (Oral), Category 4 Eye Damage/Irritation, Category 2 Skin Corrosion/Irritation, Category 2 Sensitization - Skin, Category 1 Specific Target Organ Toxicity (Single Exposure - Respiratory Tract Irritation, Narcosis), Category 3 Specific Target Organ Toxicity (Repeated Exposure), Category 2 Flammable Aerosol Category 1 Gases under pressure - Liquefied gas PHYSICAL APPEARANCE : Liquid IMMEDIATE CONCERNS : DANGER! Flammable liquid and vapor. May cause eye, skin and respiratory tract irritation. May cause asphyxiation, or brain, lung or other organ injury if inhaled, swallowed or absorbed by the skin. HAZARDOUS WARNING LABEL: DANGER! Gases Under Pressure DANGER! Extremely Flammable Aerosol Contains gas under pressure; may explode if heated Harmful if swallowed. Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction. May cause respiratory irritation. May cause drowsiness and dizziness. May cause damage to organs through prolonged or repeated exposure.

Precautionary statements

Obtain special instructions before use. Ground / bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. se only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust/fume/gas/mist/vapours/spray. Wash thoroughly after handling. Do no eat, drink or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Use only outdoors or in a well- ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. IF ON SKIN: Wash with plenty of soap and water. Get medical advice/attention if you feel unwell. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing and rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes and remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Rinse mouth. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Wash contaminated clothing before reuse. If eye irritation persists: Get medical advice/attention. If skin irritation or rash occurs Get medical advice/attention. In case of fire Use chemical extinguisher or chemical foam extinguisher for extinction. Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up. Dispose of contents/container to proper regulations.

Potential health effects

EYES : Liquid is severely irritating to the eyes. High vapor concentrations are also irritating. SKIN : Liquid is moderately irritating to the skin. Prolonged or repeated contact can result in drying of the skin which may result in skin irritation and dermatitis (rash). Liquid may be absorbed through the skin. INGESTION : Ingestion may cause headache, dizziness, fatigue, and central nervous system depression along with gastrointestinal disturbances. INHALATION : Vapors may be irritating to the nose, throat, and respiratory tract. Exposure to high vapor concentrations may cause central nervous system (CNS) depression. Aspiration of liquid may cause pneumontitis, pulmonary edema, and hemorrhaging. CHRONIC : No chronic health concerns known. CARCINOGENICITY : This material is not currently known to have carcinogenic properties. MUTAGENICITY : This material is not know to have mutagenic effects on genetic material. IRRITANCY: This material may cause irritation to the eyes, skin, and respiratory tract. Use correct PPE when handling this material. REPRODUCTIVE TOXICIITY REPRODUCTIVE EFFECTS : This material is not known to cause any reproductive system damage.

Teratogenic Effects

This material is not known to contain any teratogenic substances 3. COMPOSITION/CHEMICAL INFORMATION Chemical Name CAS Number Weight % Talc 14807-96-6 25% to 50% Acrylic Copolymer (56705700001- 56705700001 20% to 25% 5247P) Acetone 67-64-1 15% to 20% Titanium Dioxide 13463-67-7 5% to 10% Homopolymer of Hexamethylene 1192214-73-5 5% to 10% Diisocyanate bis(2-ethylhexyl)adipate 103-23-1 1% to 5% Butyl Acetate 123-86-4 1% to 5% *2-Butoxyethanol 111-76-2 1% to 5% Methyl n-Amyl Ketone 110-43-0 1% to 5% *Butanol 71-36-3 1% to 5% Aluminum Hydroxide 21645-51-2 0.01% to 1% amorphous silicone dioxide, 7631-86-9 0.01% to 1% chemically prepared Carbon Black 1333-86-4 0.01% to 1% * Toxic chemical subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.