General Information
Revision date
2015-10-06
Product name
Intex PVC Trims Made in USA
CAS No.
9002-86-2
supplier name
13 11 26 (AU Poisons Info Centre)
Manufacturer Name
64 6 377 7255 (or 0800 278 276 within New Zealand)
Icons in SDS
Company Information
company name
Intex New Zealand Pty Ltd
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H316, H320, H335
Hazard statements
Code
Statements
H316
Causes mild skin irritation
H320
Causes eye irritation
H335
May cause respiratory irritation
Section 2
2.1 Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS) Health: Serious Eye Damage/Eye Irritation, 2 B. Health: Specific target organ toxicity - Single exposure, 3. Health: Skin corrosion/irritation, 3 Safety/Cartons ICONS
Signal word
WARNING!
Hazard pictograms
H320 - Causes eye irritation. 2
Hazard statements
H335 - May cause respiratory irritation. H316 - Causes mild skin irritation. P260 - Do not breathe dust/fume/gas/mist/vapours/spray. P262 - Do not get in eyes, on skin, or on clothing. P281 - Use personal protective equipment as required. P302+352 - IF ON SKIN: Wash with soap and water. P304+340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305+351+338 - IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
2.3 Other hazards
This compound is predominantly polyvinyl chloride polymer (PVC), a substance not considered to be a hazardous chemical based upon evaluations made by our company under the OSHA Hazard Communication Standard, 29 CFR 1910.1200. Hazardous ingredients (See section 8) that may exist in this product, however, are listed as such but are not expected to pose an exposure hazard with appropriate processing and handling techniques which include engineering controls discussed in section 7 an 8. It is the obligation of the processor of this product to determine if the effectiveness of said material handling techniques, PPE and engineering controls mitigate any health risks associated with exposure to this material. 2
Principle Routes of Exposure
Eyes; Inhalation; Skin; Inhalation: Can cause irritation and inflammation of the respiratory tract. Skin Contact: May cause irritation. Eye Contact: May cause irritation. NFPA: Health = 1, Fire = 1, Reactivity = 0, Specific Hazard = n/a HMIS III: Health = 1(Chronic), Fire = 1, Physical Hazard = 0 NFPA HMIS FIRE HAZARD Health ü 1 Flammability 1 REACTIVITY
Physical hazards
0 HEALTH Personal Protection - SPECIFIC HAZARD