Note: Ingredients listed on restricted chemical lists
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
N/A
EC/CAS
68515-48-0
Name of the chemical
Di-(C9-rich branched C8-C10alkyl) phthalate
Concentration
N/A
EC/CAS
215-222-5
Name of the chemical
Zinc oxide (2)
Concentration
N/A
EC/CAS
271-090-9
Name of the chemical
1,2-benzenedicarboxylic acid, di-C8-10- branched alkyl esters, C9-rich
Concentration
N/A
General Information
Revision date
2018-04-17
Product name
Interspeed 6400 Black
1.2.2. Uses advised against
Reason
Icons in SDS
Company Information
company name
International Paint Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
sdsfellinguk@akzonobel.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H315, H317, H318, H335, H361d, H400, H410
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
1272/2008]
Product definition
Mixture
CLP CLASSIFICATION
Flam. Liq. 3, H226 Skin Irrit. 2, H315 Eye Dam. 1, H318 Skin Sens. 1, H317 Repr. 2, H361d (Unborn child) STOT SE 3, H335 Aquatic Acute 1, H400 Aquatic Chronic 1, H410 The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended. See Section 16 for the full text of the H statements declared above. See Section 11 for more detailed information on health effects and symptoms.
Signal word
Danger
Hazard statements
Flammable liquid and vapour. Causes serious eye damage. Causes skin irritation. May cause an allergic skin reaction. Suspected of damaging the unborn child. May cause respiratory irritation. Very toxic to aquatic life with long lasting effects.
Precautionary statements
General : Not applicable.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well- ventilated area. Avoid release to the environment.
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Take off contaminated clothing and wash it before reuse. IF IN EYES: Immediately call a POISON CENTER or physician.
Storage
Keep cool.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazardous Ingredients
dicopper oxide xylene rosin zineb (ISO)
Supplemental label elements
elements Wear appropriate respirator when ventilation is inadequate.
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Not applicable. Biocidal products regulation Authorisation number (UK) HSE No. 9299 Authorisation number MCCAA 2013-03-11-B01c (Malta) Authorisation number PCS No. 96285 (Ireland) Warnings for vulnerable : Children shall be kept away until treated surfaces are dry. groups Product Specific : FIRST AID Do not breathe dust/fume/gas/mist/vapours/spray. IF SWALLOWED: Information Do NOT induce vomiting. Get immediate medical advice/attention. IF ON SKIN: Wash with plenty of soap and water. Do not use solvents or thinners to clean the skin. If skin irritation or rash occurs Get medical attention. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: If not breathing, give artificial respiration. If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Give nothing by mouth. Get medical attention if you feel unwell. Contaminated work clothing should not be allowed out of the workplace. Keep unnecessary and unprotected personnel from entering. Store in a well-ventilated place. Keep container tightly closed. Do not reuse container. Collect spillage. Application, maintenance and repair activities shall be conducted within a contained area, on an impermeable hard standing with bunding or on soil covered with an impermeable material to prevent losses and minimize emissions to the environment, and that any losses or waste containing a biocide shall be collected for reuse or disposal.
Other hazards which do not result in classification
None known.