Intersmooth 7475Si SPC Brown

Hazard statements (CLP)

H226, H302, H315, H318, H332, H400, H410

Code

Statements

H226

Flammable liquid and vapour

SECTION 2: Hazards identification

1272/2008]

Product definition

Mixture

CLP CLASSIFICATION

Flam. Liq. 3, H226 Acute Tox. 4, H302 Acute Tox. 4, H332 Skin Irrit. 2, H315 Eye Dam. 1, H318 Aquatic Acute 1, H400 Aquatic Chronic 1, H410 The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended.

EU Classification

Directive 1999/45/EC [DPD] The product is classified as dangerous according to Directive 1999/45/EC and its amendments.

Classifications

R10 T; R23 Xn; R21/22 Xi; R36 N; R50/53

Other physicochemical hazards

Flammable.

Health hazards

Toxic by inhalation. Harmful in contact with skin and if swallowed. Irritating to eyes.

Environmental hazards

Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. See Section 16 for the full text of the R phrases or H statements declared above. See Section 11 for more detailed information on health effects and symptoms.

Signal word

Danger

Hazard statements

Flammable liquid and vapour. Harmful if swallowed or if inhaled. Causes serious eye damage. Causes skin irritation. Very toxic to aquatic life with long lasting effects.

Precautionary statements

General : Do not handle until all safety precautions have been read and understood.

Prevention

Use only outdoors or in a well-ventilated area. Avoid release to the environment. Do not eat, drink or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Do not breathe dust/fume/gas/mist/vapours/ spray. Wear protective gloves and eye/face protection. In case of inadequate ventilation wear respiratory protection.

Response

IF SWALLOWED: Do NOT induce vomiting. Get immediate medical attention. IF ON SKIN: Wash with plenty of soap and water. Do not use solvents or thinners to clean the skin. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: If not breathing, give artificial respiration. If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Give nothing by mouth. If skin irritation or rash occurs: Get medical advice/attention. Get medical advice/attention if you feel unwell. Collect spillage.

Storage

Store in a well-ventilated place. Keep container tightly closed in a cool place.

Disposal

Dispose of contents and container in accordance with all local, regional, national and international regulations. Do not reuse container. Keep unnecessary and unprotected personnel from entering.

Hazardous Ingredients

dicopper oxide xylene bis(1-hydroxy-1H-pyridine-2-thionato-O,S)copper

Supplemental label elements

elements Wear appropriate respirator when ventilation is inadequate.

Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles

Not applicable. Biocidal products regulation Active substances Ingredient name dicopper oxide bis(1-hydroxy-1H-pyridine-2-thionato-O,S)copper Directions for use, frequency of application and dose rate Theoretical Coverage: Airless Spray 3.7 m2/l @ 150 micron dft Theoretical Coverage: Brush, Roller 7.5 m2/l @ 75 micron dft Restrictions on use : For professional use only. Application methods: : Application Method: Airless Spray, Brush, Roller. Recommended Cleaner. : Use GTA007, International Thinner/Eqpt Cleaner for cleaning of paint application equipment.

Other hazards which do not result in classification

None known.