BRODUCT

SECTION 2: Hazards identification

Health Flammability Reactivity 1 0 FLAMMABLE OR EXPLOSIVE LIMITS (approximate percent by volume in air): Estimated values: lower N/E upper N/E CONDITIONS TO AVOID Keep product away from ignition sources, such as heat, sparks, pilot lights, Static electricity, and open flames. EXTINGUISHING MEDIA AND FIRE FIGHTING PROCEDURES : Foam, water spray (fog), dry chemical, carbon dioxide and vaporizing liquid type extinguishing agents may all be suitable for extinguishing fires involving this type product, depending on size or potential size of fire and circumstances related to the situation. Water or foam may cause frothing. Use water to keep fire-exposed containers cool... Water froth may be used to flush spills away from exposure. Minimize breathing gases, vapor, fumes, or decomposition products. Use. Suppli -air breathing equipment for enclosed or confined spaces or as otherwise feedéd. ve FIRE AND EXPLOSION HAZARDS: n/a "EMPTY" CONTAINER WARNING: Empty containers retain residue (liquid or vapor) and can be dangerous. DO NOT PRESSURIZE, WELD, CUT BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. Do not attempt to clean since residue is difficult to remove. "Empty" drums should be completely drained, properly bunged, and returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with government regulations. | Page 3 HEALTH AND HAZARD INFORMATION VARIABILITY AMONG INDIVIDUALS: Health studies have shown that many petroleum hydrocarbons and synthetic lubricants pose potential human health risks which may vary from person to person. As a precaution, exposure to liquids, vapors, mists or fumes should be minimized. approximately 1000 ppm) are irritating to the eyes and respiratory tract, may cause headaches, dizziness, anesthesia, drowsiness, unconsciousness, and other central nervous system effects, including death. INGESTION: Small amounts of this product aspirated into the pulmonary system during ingestion or vomiting may cause mild to severe pulmonary injury, possibly progressing to death. Minimal toxicity. PHYSICAL DATA The following data are approximate or typical values and should not be used for precise design purposes. BOILING RANGE: VAPOR PRESSURE: Not available < 0.1 mmHg @ 20°C SPECIFIC GRAVITY (25°C/25°C) : VAPOR DENSITY (AIR = 1): (WATER = 1) > 5 < 1.0 MOLECULAR WEIGHT: “CONTENT (EPA METHOD 24) : Wide range # stimate) EVAPORATION RATE @ 1 ATM. AND 25°C SOLUBILITY IN WATER @ 1 ATM. and 25°C (77°F) (n-BUTYL ACETATE = 1): (77°F) : Not available Nil