Note: Ingredients listed on restricted chemical lists
EC/CAS
107-13-1
Name of the chemical
Acrylonitrile
Concentration
<0.01
EC/CAS
100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
<0.25
EC/CAS
110-30-5
Name of the chemical
N,N′-ethylenebisstearamide
Concentration
<1
General Information
Revision date
2004-03-15
Product name
PPR-ABS01
Icons in SDS
Company Information
company name
info@premierplasticresins.com
e-mail address of the competent person responsible for the Safety Data Sheet
info@premierplasticresins.com
Section 2
SECTION 2: Hazards identification
1. Overview: a. Product is translucent white to off-white or pigmented solid pellets with a slight odor. Spilled material may present a slipping hazard. This product is not classified as a combustible dust, however a combustible concentrate of dust may occur if fines are suspended in air. Avoid contact with strong oxidizing agents. b. This material can begin to decompose at elevated temperatures, producing fumes that can contain carbon dioxide, carbon monoxide and other organic compounds. Adequate ventilation should be insured to minimize exposure.
Potential health effects
a. Eyes: Fine particles of dust may cause mechanical irritation. Fumes can cause irritation and redness. b. Skin: This material is not known to cause skin irritation or allergic skin reactions. c. Ingestion: Small amounts are not known to cause injury. d. Inhalation: This material is not expected to be inhaled in pellet form. Fine particles of dust or fumes may cause mechanical irritation to respiratory tract. Prolonged exposure to fumes can cause nausea and headache. e. Contact with molten material: Can burn skin.
