MSDS

SECTION 2: Hazards identification

Classification according to GHS

Sensitisation, skin (1); Specific target organ toxicity, single exposure; respiratory tract irritation (3).

Hazard statements

May cause an allergic reaction. May cause respiratory irritation R36- irritating to eyes R66- repeated exposure may cause skin dryness and dizziness R67- vapors may cause drowsiness R11- highly flammable S9- keep container in a well-ventilated place S16- keep away from sources of ignition- no smoking S26- in case of contact with eyes, rinse immediately with water. S37- Wear suitable gloves. To the best of our knowledge at the date of printing, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Registered in England No. 5701697 Document Title: Material Safety Data Sheet MSDS: Wound Cleansing Wipes Reference(s): 2W99439 revision V1 (08.18) MATERIAL SAFETY DATA SHEET WOUND CLEANSING WIPES 1. PRODUCT AND COMPANY IDENTIFICATION EVO GLOBAL HOLDINGS LIMITED Units 5&6 Grants Drive Newland House, Unit 2, Greenogue Business Park Express Way, Tuscany Park Rathcoole Normanton Dublin UK Ireland WF6 2TZ D24 W56C info@evo‐group.co.uk 2. COMPOSITION AND INFORMATION ON INGREDIENTS CAS# Chemical Name Percent EINECS/ELINCS 7647 -14-5 Sodium chloride 0.9 231 -598 -3 7732 -18-5 Water 99.1 231 -791 -2

Prevention

Avoid breathing mist, vapours, spray. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves. Use only outdoors or in a well-ventilated area.

Response

If on skin, wash with plenty of water. If skin irritation or a rash occurs, get medical advice. Call a poison centre if you feel unwell. Take off contaminated clothing and wash it before reuse. If inhaled, remove person to fresh air and keep comfortable for breathing. 2.3 Emergency Overview: N/A 3. INFORMATION ON INGREDIENTS Component CAS No. EC#. Weight (%) Carbomer 940 9003-01-4 0.49 Melaleuca Oil 68647-73-4 Emulsifiers Surfactant 61788-85-0 500-147-5 0.09 Thickeners 102-71-6 203-049-8 0.19 Purified Water 7732-18-5 231-791-2 98.3 4. FIRST AID MEASURES Normal use does not require special measures; for industrial production in the long term, refer to the following: 4.1 Skin Exposure: After skin contact, wash with water and soap. 4.2 Eye Exposure: After eye contact, flush eyes with water. 4.3 Inhalation Exposure: After inhalation, remove victim to fresh area. 4.4 Oral Exposure: After swallowing, do not induce vomiting. Get medical attention. 4.5 PPE for First Aid responders: No data available. 4.6 Symptoms/effects, acute and delayed: No data available. 4.7 Indication of immediate medical attention: No data available. 5. FIRE FIGHTING MEASURES 5.1 Extinguishing Media: Use extinguishing agent suitable for local conditions and the surrounding environment such as dry powder or CO2. 5.2 Unsuitable extinguishing media: No data available. 5.3 Specific hazards arising from the chemical: No data available. 5.4 Specific protective actions for fire fighters: Protective equipment. Wear self-contained respirator. Wear fully protective impervious suit. 6. ACCIDENTAL RELEASE MEASURES Normal use does not require special measures; for industrial production in the long term, refer to the following: 6.1 Procedure of Personal Precaution: Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation. 6.2 Protective equipment: No data available. 6.3 Emergency procedures: Remove ignition sources and evacuate area. Sweep up using a method that does not generate dust. Collect as much of the spilled material as possible and place the spilled material into a suitable disposal container. Keep spilled material out of sewers, ditches and bodies of water. 6.4 Environmental precautions: Do not allow material to be released to the environment without proper governmental permits. 6.5 Methods for containment and cleaning up: All waste must refer to the United Nations, the national and local regulations for disposal. 7. HANDLING AND STORAGE Normal use does not require special measures; for industrial production in the long term, refer to the following: 7.1 Handling: Store in a cold, dry, well-ventilated environment. Store away from food and water supplies. Wash your hands thoroughly before eating and drinking. Storage of chemicals needed to prevent the generation and accumulation of static electricity when handling the container. Stay away from taboo, such as strong oxidising agents. 7.2 Fire and explosion protection: The product is non-flammable.

Storage

Store in a cool place. Keep container closed. Store in a dry and ventilated place Keep container tightly sealed. 8. EXPOSURE CONTROL/PPE 8.1 Engineering Controls: The usual precautionary measures for handling chemicals should be followed. Keep away from foodstuffs, beverages and feed. Remove all soiled and contaminated clothing immediately. Wash hands before breaks and at the end of work. 8.2 Personal Protective Equipment: 8.2.1 Respiratory: Wear suitable protective mask in order to reduce the respiratory system. With a large leakage, wear chemical protective clothing, including self-contained breathing apparatus. 8.2.2 Eye: Wear safety goggles or eye protection combined with respiratory protection. 8.2.3 Clothing: Wear suitable protective clothing to minimise contact with skin. The type of protective equipment must be according to the concentration and the content of certain hazardous substances in the workplace. 8.2.4 Hand: Wear appropriate protective gloves to reduce skin contact. 9. PHYSICAL CHEMICAL PROPERTIES 9.1 Colour: White. 9.2 Physical State: Paste liquid. 9.3 Odour: Not available. 9.4 pH: 4.8 (25°C, 70%RH). 9.5 Flash Point: >100°C (Closed cup). 9.6 Solubility: Slightly soluble in water. 10. STABILITY AND REACTIVITY 10.1 Chemical stability: Stable. 10.2 Possibility of hazardous reaction: No data available. 10.3 Conditions to avoid: Incompatible materials. 10.4 Incompatibilities Materials: No data available. 10.5 Hazardous Decomposition Products: Carbon oxide. 11. TOXOLOGICAL INFORMATION 11.1 Acute toxicity: CAS No. LC50/LD50 9003-01-4 LD50 Rat (oral): 2500mg/kg 68647-73-4 LD50 Rat (oral): 1400-2700mg/kg 61788-85-0 No data available. 102-71-6 LD50 Rat (oral): 8000mg/kg 7732-18-5 No data available. 11.2 Skin corrosion/irritation: No data available. 11.3 Serious eye damage/irritation: No data available. 11.4 Respiratory or skin sensitisation: No data available. 11.5 Germ Cell mutagenicity: No data available. 11.6 Carcinogenicity: No data available. 11.7 Reproductive toxicity: No data available. 11.8 Specific target organ toxicity - Single exposure: No data available. 11.9 Specific target organ toxicity - Repeated exposure: No data available. 11.10 Aspiration hazard: No data available. 11.11 Information on the likely routes of exposure: No data available. 11.12 Eye, Skin, Ingestion and Inhalation: No data available. Store in a cool, dry, ventilated plce. Storage period of 2 years 8. EXPOSURE CONTROL/PPE 8.1 Personal Protection: N/A 8.2 Eye Protection: N/A 8.3 Respiratory Protection: N/A 8.4 Skin Contact: N/A 9. PHYSICAL CHEMICAL PROPERTIES 9.1 Physical State: Solid 9.2 Colour: White 9.3 PH Value: N/A 9.4 Density: N/a 9.5 Shape: Scroll 9.6 Smell: Slight Odour 9.7 Explosive Condition: N/A 9.8 Soluble: Insoluble 10. STABILITY AND REACTIVITY 10.1 Chemical and physical properties: Stable 10.2 Potential hazards under special conditions: N/A 10.3 Substances to be avoided: Toxic and harmful substances. 10.4 Harmful decomposition: Smoke 11. TOXOLOGICAL INFORMATION 11.1 Acute Toxicity: N/A 11.2 Local Effect: N/A 11.3 Sensitivity: Low ratio of sensitive ingredients. 11.4 Slow toxicity or long term toxicity: Product uses low-sensitive glue, which should lessen the change of allergic reaction.

ECOLOGICAL INFORMATION

12.1 Ecological Toxicity: No data available. 12.2 Persistence and degradability: No data available. 12.3 Bioaccumulative Potential: No data available. 12.4 Mobility in Soil: No data available. 12.1 Possibility of environmental impact: N/A 12.1 Potential effect- Unknown 12.2 Persistence and degradability- Unknown 12.3. Ecotoxity- Unknown 13. DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods recommendation: Consult state, local or national regulations to ensure proper disposal. 13.2 Empty container warning- empty containers may contain product residue; follow SDS and label warnings even after they have been emptied. 14. TRANSPORT INFORMATION

Other hazards

No data available 13. DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods recommendation: Consult state, local or national regulations to ensure proper disposal. 13.2 Uncleaned packaging recommendation: Disposal must be made according to official regulations. 14. TRANSPORT INFORMATION Not applicable. 15. REGULATORY INFORMATION CAS No. TSCA IECSA DSL/NDSL EINECS/ELINCS/NLP 9003-01-4 Listed Listed DSL Listed 68647-73-4 Listed Listed DSL Listed 61788-85-0 Listed Listed DSL Listed 102-71-6 Listed Listed DSL Listed 7732-18-5 Listed Listed DSL Listed To the best of our knowledge at the date of printing, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Registered in England No. 5701697 Document Title: Material Safety Data Sheet MSDS: Microporous Tape Reference(s): 2W99439 revision V1 (11.18) MATERIAL SAFETY DATA SHEET MICROPOROUS TAPE 1. PRODUCT AND COMPANY IDENTIFICATION EVO GLOBAL HOLDINGS LIMITED Units 5&6 Grants Drive Newland House, Unit 2, Greenogue Business Park Express Way, Tuscany Park Rathcoole Normanton Dublin UK Ireland WF6 2TZ D24 W56C info@evo‐group.co.uk 2.1 Health hazard effects: N/A 2.2 Environmental impact: N/A

Other physicochemical hazards

N/A 2.4 Special hazard: N/A 2.5 Main Symptoms: N/A 3. INFORMATION ON INGREDIENTS 3.1 Ingredients: 50%-60% Non-woven paper, 40%-50% Hot melt adhesive. 4. FIRST AID MEASURES 4.1 Description of first aid measures: 4.1.1 General: No special instructions, according to conventional treatment. 4.1.2 Inhalation: N/A 4.1.3 Ingestion: Induce vomiting. 4.1.4 Skin contact: N/A 4.1.5 Eye contact: N/A 5. FIRE FIGHTING MEASURES 5.1 Fire fighting information: No special hazards in the process of fire fighting. 5.2 Fire extinguishing agent: Foam, dry powder, carbon dioxide. 6. ACCIDENTAL RELEASE MEASURES 6.1 Cleaning Method: Such as adhesive tape glue residue on the skin, the proposed use of alcohol scrub removal. 6.2 Environmental Considerations: N/A 7. HANDLING AND STORAGE 7.1 Management: No speical program control.

Disposal

13.1 Waste disposal method: Incineration or landfill under environmental protection authority. 14. TRANSPORT INFORMATION 14.1 International Shipping Regulations: N/A 14.2 United Nations Regulations: N/A 14.3 Domentic Transportation Regulations: N/A 15. REGULATORY INFORMATION 15.1 Applicable laws and regulations: Product registration standard. To the best of our knowledge at the date of printing, the information contained herein is accurate. However, neither the above-named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Registered in England No. 5701697 Document Title: Material Safety Data Sheet MSDS: Plaster Adhesive Reference(s): 2W99439 revision V1 (08.18) MATERIAL SAFETY DATA SHEET PLASTER ADHESIVE FOR WASHPROOF, FABRIC, HEAVYWEIGHT FABRIC, BLUE, AND MULTISOFT PLASTERS 1. PRODUCT AND COMPANY IDENTIFICATION EVO GLOBAL HOLDINGS LIMITED Units 5&6 Grants Drive Newland House, Unit 2, Greenogue Business Park Express Way, Tuscany Park Rathcoole Normanton Dublin UK Ireland WF6 2TZ D24 W56C info@evo‐group.co.uk 2.1 Emergency overview- IRRITANT HIGHLY FLAMMABLE 2.2 Eye- Will cause eye irritation. 2.3 Skin contact- Repeated or prolonged contact may cause defatting of the skin resulting in dryness, cracking and dermatitis. 2.4 Inhalation- Low order of toxicity. 2.5 Ingestion- Low oral toxicity. 3. INFORMATION ON INGREDIENTS CHEMICAL FAMILY Component CAS No. Concentration 3.1- Ethylacetate 141-78-6 10-30 3.2- Isopropanol 67-63-0 10-20 3.3-n-Heptane 142-82-5 1-20 3.4- Toluene 108-88-3 1-5 4. FIRST AID MEASURES Normal use does not require special measures; for industrial production in the long term, refer to the following: 4.1 Eye- Irrigate with eyewash solution or clean water until pain is relived. 4.2 Skin contact- Wash skin with soap and water. Remove grossly contaminated clothing, Including shoes, and launder before re-use. Discard shoes. 4.3 Inhalation- Remove to fresh air. If breathing is difficult, give oxygen. If breathing has Stopped, give artificial respiration. Get medical attention. 4.4 Ingestion- Treat symptomatically and supportively. Get medical attention. 5. FIRE FIGHTING MEASURES 5.1 Extinguishing Media: Use extinguishing agent suitable for local conditions and the surrounding environment such as dry powder or CO2 dry chemical; Foam, Water fog. 5.2 Special firefighting procedures- Fire fighters should be equipped with self-contained apparatus to protect against potentially toxic and irritating fumes; cool exposed equipment with water spray. 5.3 Fire and explosion- Dangerous fire hazard when exposed to heat or flame. The vapour is heavier than air and may travel a considerable distance to a source of ignition and flashback. 5.4 Hazardous combustion products- Thermal decomposition could produce carbon monoxide, carbon dioxide, and unidentified organic compounds. 5.5 Lower explosion limit- (%) 2.0 5.6 Upper explosion limit (%) 19.0 5.7 Auto flammability- >260 degrees 5.8 Flash point- -4 degrees 6. ACCIDENTAL RELEASE MEASURES Normal use does not require special measures; for industrial production in the long term, refer to the following: 6.1- Spill and leak procedures- Shut off ignition sources, stop leak if you can do it without risk. For small liquid spills, take up with sand or other absorbent material. For larger spills, dam far ahead of spill for later disposal. No smoking, flames or flares in hazard area! Keep unnecessary people away. 7. HANDLING AND STORAGE Normal use does not require special measures; for industrial production in the long term, refer to the following: 7.1 Handling: Store in a cold, dry, well-ventilated environment. Store away from food and water supplies. Wash your hands thoroughly before eating and drinking. Storage of chemicals needed to prevent the generation and accumulation of static electricity when handling the container. Stay away from taboo, such as strong oxidizing agents. 7.2- sensitive to static- Yes. 7.3- Special sensitivity- Keep away from heat. 7.4- Sensitivity to mechanical impact- No. 8. EXPOSURE CONTROL/PPE Component Exposure limits 8.1- Ethylacetate ACGIH-TW A: 400ppm 8.2- Isopropanol ACGIH-STEL:500ppm ACGIH-TW A:400ppm 8.3- n-Heptane ACGIH-STEL:500ppm ACGIH-TW A:400ppm 8.4- Toluene ACGIH-TW A: 50ppm (skin) 8.5- Ventilation- Enough to keep vapors below the TLV exposure limits. 8.6- Eye protection- Goggles 8.7- Glove requirements- Impervious neoprene or rubber gloves are recommended 8.8 -Clothing requirements- Uniforms, overalls, or a lab coat. 8.9- Wash requirements- Wash before eating, drinking, lab coat should be worn. 8.10- Respiratory requirements- use approval respirator if required. Self-contained breathing apparatus in emergency and non-routine situations. 9. PHYSICAL CHEMICAL PROPERTIES Pure substance or preparation- Preparation 9.0- Physical form- Liquid 9.1- Colour- Colorless 9.2- Odor- Petrol-like 9.3- Boiling Point- > 60degrees 9.4- pH: 4.8 (25°C, 70%RH). 9.5- Flash Point: >100°C (Closed cup). 9.6- Solubility: Slightly soluble in water. 10. STABILITY AND REACTIVITY 10.1 Chemical stability: Stable. 10.2 Possibility of hazardous reaction: No data available. 10.3 Conditions to avoid: Incompatible materials. 10.4 Incompatibilities Materials: No data available. 10.5 Hazardous Decomposition Products: Carbon oxide. 11. TOXOLOGICAL INFORMATION 11.1 Eye- Will cause eye irritation. 11.2 Skin contact- Repeated or prolonged contact may cause defatting of the skin resulting in dryness, cracking and dermatitis. 11.3 Inhalation- Low order of toxicity. 11.5 Ingestion- Low oral toxicity. 11.6 Skin corrosion/irritation: No data available. 11.7 Serious eye damage/irritation: No data available. 11.8 Respiratory or skin sensitization: No data available. 11.9 Germ Cell mutagenicity: No data available.

IATA CLASSIFICATION

PROPER SHIPPING NAME- ADHESIVES

Hazard categories

3 U.N NUMBER- UN1133 PACKAGING GROUP- 11 IMDG CLASSIFCATION PROPER SHIPPING TIME- ADHESIVES 3.2 U.N NUMBER- UN1133 PACKAGING GROUP- 11 ADR/RID PROPER SHIPPING TIME- ADHESIVES 3 SUBSIDIARY HAZARD CLASSD U.N NUMBER- UN1133 PACKAGING GROUP- 11 15. REGULATORY INFORMATION