General Information
Product name
4-Iodoaniline
CAS No.
540-37-4
supplier name
Infinium Pharmachem Pvt. Ltd.
Icons in SDS
Company Information
company name
Infinium Pharmachem Pvt. Ltd.
Section 2
R-phrase(s)
R36/37/38 Irritating to eyes, respiratory system and skin. R22 Harmful if swallowed.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
2.3 Other hazards
None. 4.1 Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician 4.2 Most Important symptoms & efforts, both acute and delayed Absorption into the body leads to the formation of metheamoglobin which in sufficient concentration causes cyanosis. Onset may be delayed 2 to 4 hours or longer. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. 4.3 Indication of any immediate medical attention and special treatment needed No data available 5.1 Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 Special hazards arising from the substance or mixture Carbon oxides, nitrogen oxides (NOx), Hydrogen iodide 5.3 Advice for firefighters Wear self contained breathing apparatus for fighting if necessary.
Further information
No data available 6.1 Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. 6.2 Environmental precautions Do not let product enter drains. 6.3 Methods and materials for containment and cleaning up Pick Up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. 6.4 Reference to other sections For disposal see section 13 7.1 Precautions for safe Handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed. Normal measures for preventive fire protection. 7.2 Conditions for safe Storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Light Sensitive. 7.3 Specific end uses No data available 8.1 Control parameters Components with workplace control Parameters. 8.2 Exposure Controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Safety glasses with side-shields conforming to EN16.Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator. For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). 9.1 Information on Basic physical & chemical properties a) Appearance Form: solid Color: light yellow b) Odor no data available c) Odor Threshold no data available d) pH no data available e) Melting point/freezing Melting point/range: 61 - 63 °C – lit Point f) Initial boiling point and no data available Boiling range g) Flash point no data available h) Evaporation rate no data available i) Flammability (solid, gas) no data available j) Upper/lower no data available Flammability or explosive limits k) Vapor pressure no data available l) Vapor density no data available m) Relative density 5,68 g/mL at 25 °C n) Water solubility no data available o) Partition coefficient: n-octanol /water no data available p) Auto ignition no data available Temperature q) Decomposition no data available Temperature r) Viscosity no data available s) Explosive properties no data available t) Oxidizing properties no data available