MODIFIER C-10

INEOS Composites US LLC

Revision date : 2020-01-15

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS06
Health risk rating 5
Safety risk rating 5
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

General Information

Revision date

2020-01-15

Product name

MODIFIER C-10

CAS No.

100-42-5

1.2.1 Relevant identified uses

Resins

Emergency telephone

1-800-424-9300 (+1-703-527-3887 for direct dial

Icons in SDS

Company Information

company name

INEOS Composites US LLC

e-mail address of the competent person responsible for the Safety Data Sheet

sds.composites@ineos.com

GHS Information

Signal word

Danger

Section 2

2.1 Classification of the substance or mixture

Flammable liquids : Category 3 Combustible Dust Acute toxicity (Inhalation) : Category 4 Skin irritation : Category 2 Eye irritation : Category 2A Specific target organ toxicity : Category 3 (Respiratory system) - single exposure Specific target organ toxicity : Category 1 (Auditory system) - repeated exposure (Inhalation)

Signal word

Danger

Hazard statements

Flammable liquid and vapor. May form combustible dust concentrations in air. Causes skin irritation. Causes serious eye irritation. Harmful if inhaled. May cause respiratory irritation. Causes damage to organs (Auditory system) through prolonged or repeated exposure if inhaled.

Prevention

Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ ventilating/ lighting/ equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust/ fume/ gas/ mist/ vapors/ spray. Wash skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/ eye protection/ face protection. Hazardous polymerization can occur under certain conditions. Avoid excessive heat, direct sunlight, peroxides, and other polymerization catalysts. Store in a cool place and maintain proper concentrations of inhibitor and oxygen.

Response

IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/ attention if you feel unwell. If skin irritation occurs: Get medical advice/ attention. If eye irritation persists: Get medical advice/ attention. Take off contaminated clothing and wash before reuse. In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool. Store locked up.

Disposal

Dispose of contents/ container to an approved waste disposal plant.

2.3 Other hazards

Static Accumulating liquid Hazardous polymerization may occur.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.