Note: Ingredients listed on restricted chemical lists
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
98.7-99.9
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
N/A
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
<0.1 100%
EC/CAS
1305-78-8
Name of the chemical
Calcium oxide
Concentration
0-.5%
EC/CAS
215-168-2
Name of the chemical
Iron Oxide Red
Concentration
<0.1
General Information
Revision date
2015-12-28
Product name
Anchor Bond Anchor Crete Part C Sand Blend
Chemical name
Anchor Bond Anchor Crete Part C Sand
Icons in SDS
Company Information
company name
INDUSTRIAL PROTECTIVE COATINGS, INC
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H314, H317, H335
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage
Section 2
SECTION 2: Hazards identification
21 Classification of symbol STOT RE 1; Carcinogen 1A
Signal word
Danger 23 Hazard statement(s) Causes damage to lungs, kidneys, through prolonged or repeated exposure. Causes severe skin burns and eye damage. May cause cancer by prolonged or repeated inhalation. May cause an allergic skin reaction. May cause respiratory irritation. 24 Pictograms (if possible) SO
Precautionary statements
Do not breathe dust. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Obtain special instructions before use. Do not handle until all safety instructions have been read and understood. Wear eye and respiratory protection. If exposed or concerned Get medical attention. Stored locked up. Dispose of contents in accordance with local, regional and national regulations. Wear protective gloves. Wear eye or face protection. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Causes eye and skin burns. See Section 4 for additional details. May present risk of engulfment. See Section 7 for additional details. Overexposure to wet cement can cause severe skin damage in the form of chemical burns, including third degree burns. The same severe injury can oceur if wet or moist skin is exposed to dry portland cement. Clothing wet with moisture from cement can transmit the caustic effects to the skin, causing chemical burns. Portland cement causes skin burns with little warning discomfort or pain cannot be relied upon to alert a person to a serious injury. You may not feel pain or the severity of the burn until hours after the exposure. conditions which may be aggravated by exposure Contact with Medical wet cement may aggravate existing skin conditions. Sensitivity to hexavalent chromium can be aggravated by exposure. IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing. Prolonged and repeated inhalation of respirable crystalline silica-containing dust in excess of appropriate exposure limits has caused silicosis, fibrosis or scar tissue formations in the lungs. Calla POISON CENTER of physician if you feel unwell. IF ON SKIN Wash with plenty of pH neutral soap and water. Take off contaminated clothing. Page 2 of 11 Wash contaminated clothing before reuse. If skin irritation or rash occurs get medical attention. Portland cement may contain trace amounts of hexavalent chromium. Hexavalent chromium is associated with allergic skin reactions which may appear as contact dermatitis and skin ulcerations. Persons already sensitized may react to their first exposure to cement. Other individuals may develop allergic dermatitis after repeated exposure to cement. The symptoms of allergic reactions may include reddening of the skin, rash, and irritation. Symptoms of chronic exposure to wet cement may include reddening, irritation, and eczematous rashes. Drying, thickening, and cracking of the skin and nails may also occur. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Exposure to dust may cause immediate or delayed irritation or inflammation. Eye contact by larger amount of dry power or splashes of wet Portland cement may cause effects ranging from moderate eye irritation to chemical burns or blindness. Immediately call a POISON CENTER or physician. IF INGESTED Irritating to mouth, throat, stomach and digestive tract. Do not ingest Portland cement. Get immediate medical attention. Keep container tightly closed in a dry and well-ventilated area. Dispose of contents and container in accordance with all local, regional, national and international regulations. 26 Description of hazards not Increased risk of systemic autoimmune disease (scleroderma, rheumatoid otherwise classified arthritis, and systemic lupus erythematosus) through prolonged or repeated inhalation. Increased risk of tuberculosis through prolonged or repeated inhalation. Smoking increases the risk of lung function impairment and chronic obstructive pulmonary disease COPD through prolonged or repeated inhalation. 27 Statement with mixture amounts Product identifiers: Silica Sand, Quartz, Novaculite, Silicon Dioxide, Silica Flour, Portland Cement, Calcium Magnesium Hydroxide L SECTION 3 ON
2.1 Classification of the substance or mixture
STOT RE 1; Carcinogen 1A 2.2 Signal Word Danger 23 Hazard statement(s) Causes damage to lungs, kidneys, through prolonged or repeated exposure. Causes severe skin burns and eye damage. May cause cancer by prolonged or repeated inhalation. May cause an allergic skin reaction. May cause SO respiratory irritation. 24 Pictograms (if possible) 25