General Information
Version
1.0
Revision date
2018-02-01
Product name
73X Reconditloner
Product name
73X Reconditloner
Identification on the label/Trade name
11
1.2.1 Relevant identified uses
OF THE PRODUCT
supplier name
Independent Ink Incorporated
Emergency telephone
(800) 424 9300
Icons in SDS
Company Information
company name
Independent Ink Incorporated
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H301, H317, H318, H319, H332, H351, H402
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
OSHA 21 CLASS|FICATION OF THE PRODUCT H225 Flammable Liquid 2 Highly flammable Ilquid end vapor H301 Acute Toxicity 3 Moderately toxlc if swallowed H317 Skin Sensitivity May cause wriallergie shin reacting H319 Eye lsritant 24 Causes serious eye Irrilation H332 Harmful If Inhaled Ha36 STOTSE3 May cause drowsiness and dizziness H351 Carclnogen2 Suspected of causing cancer H402 Aquatic Acute 3 Harmful to aquatle Ilfe 22
2.2 Label elements
Safety Data Sheet Product ID: 73X Reconditioner SECTION 4; FIRST ALO MLASUAES 41 DESCAIPTION OF FIRST AID MEASURES EYECONTACT: Flush Immediately with water for 15 minutes, Get medical allention. SKIN CONTACT: Wash wilh soap and water, Remove contaminated clothing. Consull a physician If irritation persists. Do not re-use clothing until cleaned. INHALATION: Remove to [rash alr. Reslore breathing. Get medical attention, INGESTION: Do not give Iiquids If victim is unconscious or drowsy. Do nat Induce vomiting unless directed to da so by medical personnel. |! vorniting occurs, the head should be kept law so Lhat vomit does not enter the lungs. Never give anything by mouth to an unconsclous person. If unconscious, place In recovery position and get medical attention Immediately. Call a Polson Control Center or physician, SECTION 5: FIRE FIGHTING MEASURES 5 PHYSICAL CHARACTERISTICS FLASH POINT: 14°C / 57°F METHOD USED: TCC FLAMMABLE LIMITS IN AIR BY VOLUME: = LOWER: 2.4 UPPER: 14.5 5.2 EXTINGUISHING MEDIA EXTINGUISHING MEDIA: Alcohol foam, CO2, dry chemical, water fog. DO NOT use a direci slream of water, Product will float and can be re lgniled on surface of water, SPECIAL FIRE FIGHTING PROCEDURES & PRECAUTIONS: Clear lice area of unprotected personnel. Do not enter confined fire space without using self and clothing. Keep run-off water out of sewers and water sources. If risk of water pollutlon occurs, notify appropriate aulhoritles. UNUSUAL FIRE & EXPLOSION HAZARDS: Contelners exposed to Intense heat from fires should be cooled with water lo prevent vapor pressure buildup that could result In container rupture. Vapors are heavier than alr and may spread near ground to sources of ignition. May explode when heated or when exposed ta flames or sparks, May form explosive or toxic mixtures with alr. SPECIFIC HAZARDS: Fire creates loxlc gases/vapors/fumes of Carbon Monoxide (CO), Carbon Dioxide [CO2}. [ seenow 6: ACCIDENTAL RELEASE MEASURES Version: 1.0 Page 3 of 11 February 1, 2018 Flammable Liquids: Category 2 Serlous Eye Damage/Irrltatlon: Category 2A SS EE Butony Diglycol | 112-34-5 203-961-6 220 = Acute toxicity, Dermal Category 5 Eye Irritation Category 2A Target Organ Irritant Liver, Kidney, Blood = | XEA36 - Monohydroxymethane 67-56-14 200-659-6 >2% — Flammable Liquids Category 2 Acute Toxicily Oral Category 3 Acute Toxiclly Skin Calegory 3 Acute Toxicity Inhalation Category 3 Serious Eye Damage/Irritatlon Categary 20 Specific Target Organ Toxlelty (Single Exposure, Narcottc effects) Category 1 | T F;R11 R23/R24/R25 RI9/23/24/25 Toxle isopropyl Alcohol 67-63-0 200 661-7 u Flammable Liquids: Category 2 | Serlous Eye Damage/ Irritation Category 2A: F;RA1 XI;A36 R67 Version: 1.0 Page 2 of 11 February 1, 2018 Safety Data Sheet Product ID: 73X Reconditloner 6.1 STEPS TO BE TAKEN IF MATERIAL IS SPILLED OR RELEASED; Avold eye or skin contact. Place leaking ‘$ In a well area Ignition sources. If fre potential exists, blanket spill with foam or use waler spray to disperse vapors, Contaln spltl to minimize contaminated area and fecilitale salvage or disposal. To clean splll, flush area sparingly with water or use an absorbent. Avold run-off Into storm sewers and ditches Uhal lead lo natural waterways. All cleanup and disposal should be carled out In accordance with foderal, sate and local regllotians. If nequired, uldte and focal culhoritins should be natilled, 6.2 WASTE DISPOSAL METHOD: Recovered liquids may be sent lo a licensed recycler or Incineration facillty. Contaminated material must be disposed of in a permitted waste management facility. Consult federal, stale, or local disposal authorities for approved procedures, SECTION 71 HANDLING AND STORAGE ad PRECAUTIONS FOR SAFE HANDLING Protect agalnst physical damage. Store In a cool, dry well-ventilated location, away from any area where the fire hazard may be acute, Outside or d storage Is preferred, Separate from fe should be bonded and grounded for transfers to avoid static sparks. Storage and use areas should be No Smoking areas. Use non-sparking type tools and Including proof fe of this material may be hazardous when emply since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product Donel aitemet.to.clean empty containersince.ocsidur [dilficult.to.nemove, 2o.not preasurine. cul wield, beaten, solder, dri], grind or expose such contalners to heal, sparks, flame, stalle electriclly or other sources of Ignition: they may explode and cause injury or death. Keep liquid away from heal, sparks and open flame. Surfaces thal are sufficiently hot may ignite even liquid product In the absence of spark or flame. ExtInguish pilot lights, clgaretles and turns off other sources of Ignition prior lo use and until all vapors are gone. Vapors may accumulate and travel to ignition sources distant from hondiing petit flawh fhe edn resutt, Keep contalners tightly closed when nol In use. Use adequate ventilation, Containers, even those that have been emptled, can contain explosive vapors. Do nat cul, dill, grind, weld, or perform similar operations on or near the contalners. Static electricity may accumulate and create a fire hazard, Ground lixed equipment. Bond and ground transfer containers and equipment Store in a cool dry place with adequate ventilation Keep away Irom open flames and high temperatures, Wash wilh soap and water before ealing, drinking, smoking or using tollet facilities. Launder contaminated clothing before re-use. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 61 EXPOSURE GUIDELINES | Chemical Name
Appearance/Odor
Clear, slight adar SOUUMULITY IN WATER Negligible | Wor 628 grams/liter_ 92 OTHER EKPOSURE GUIDELINES 93 ENGINEERING MEASURES Ensure Use process local exhaust ventilation, or other engineering controls lo keep alrbome levels below recommended exposure |Imits. If user operations generate dust, fume or mist, use ventllatlon ta keep exp lo alrborne below the exp limit, Version: 1.0 Page 5 of 11 February 1, 2018 Safety Data Sheet Product ID: 73X Reconditioner fatigue, muscular weakness and drowsiness. In extreme cases loss of consciousness. may occur. 113 IRRITATON/COAROSION Skin: Causes mild imitation, Repeated exposure may cause skin cracking or dryness, Eyes: Causes serious eye damage Resptralory: Not classified. No known significant effects or crilicat hazards, 11.4 SENSITIZATION Skin: Not classifled, No known significant effects or critical hazards. Resplratory: Not classified. No known slgmficani effects or crilical hazards 15 MUTAGENICITY Not determined 11.6 CARCINOGENICITY Chemical Name ACGIH IARC NTP |
2.1 Classification of the substance or mixture
H225 Flammable Liquid 2 Highly flammable Ilquid end vapor H301 Acute Toxicity 3 Moderately toxlc if swallowed H317 Skin Sensitivity May cause wriallergie shin reacting H319 Eye lsritant 24 Causes serious eye Irrilation H332 Harmful If Inhaled Ha36 STOTSE3 May cause drowsiness and dizziness H351 Carclnogen2 Suspected of causing cancer H402 Aquatic Acute 3 Harmful to aquatle Ilfe 22