Note: Ingredients listed on restricted chemical lists
EC/CAS
231-100-4/7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
N/A
EC/CAS
231-146-5/7440-36-0
Name of the chemical
Antimony
Concentration
N/A
EC/CAS
231-131-3/7440-22-4
Name of the chemical
Silver
Concentration
N/A
General Information
Revision date
2020-12-21
Product name
INDALLOY WITH LEAD AND/OR TIN AND/OR SILVER AND ANTIMONY
1.2.1 Relevant identified uses
INDUSTRIAL USE - METAL ALLOY MIX CONSISTING OF ONLY LEAD AND/OR TIN AND/OR SILVER, ANTIMONY (MIXTURE). REVIEW ALLOY TABLE FOR MIXTURES AVAILABLE
Manufacturer Name
In America
Emergency telephone
1 (800) 424-9300, +1 (703) 527-3887, (86) 512-6283-4900, +65 6268-8678
Icons in SDS
Company Information
company name
In America
e-mail address of the competent person responsible for the Safety Data Sheet
nswarts@indium.com
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
Principle Routes of Exposure
CARCINOGEN LISTED IN: Eye Inhalation Skin Ingestion NTP IARC
Signal word
Danger
Hazard statements
H317 May cause an allergic skin reaction H319 Causes serious eye irritation H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled H360FD May damage fertility or the unborn child H362 May cause harm to breast-fed children H372 Causes damage to organs through prolonged or repeated exposure
Precautionary statements
P233 Keep container tightly closed P261 Avoid breathing dust/fume/gas/mist/vapors/spray P263 Avoid contact during pregnancy/while nursing P270 Do not eat, drink or smoke when using this product P273 Avoid release to the environment P280 Wear protective gloves/protective clothing/eye protection/face protection P362 +P364 Take off contaminated clothing and wash before reuse P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell P302 +P352 IF ON SKIN: Wash with plenty of soap and water P304 + 341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing P305 + 351 IF IN EYES: Rinse continuously with water for several minutes (15 mins) ----------------------------------------------------------------------------------------------------------------------------------------------------------------- Review metal alloy table of mixtures. ---------------------------------------------------------------------------------------------------------------------
Potential health effects
Eye Contact: Contact with powered metal alloy or fume from molten metal may cause irritation. Severe eye damage may result from hot molten metal being splashed into the eyes. Wear safety glasses and face shield when working with molten metal, cutting or grinding. Ingestion: Ingestion of dust may cause headache, nausea, abdominal pain, fatigue and pain in the legs, arms and joints. May be harmful if swallowed. Inhalation: Inhalation of fume or dust may cause local irritation to the respiratory system. Inhalation of fume or dust may cause headache, nausea, abdominal pain, fatigue and pain in the legs, arms and joints. Normal handling of solid form has no inhalation issues. Skin Contact: Normal handling of solid form should not cause any adverse health effects. Powder form may cause skin irritation. Hot molten metal may cause burns to the skin. Wear protective equipment when handling molten metal. Antimony may cause dermatitis. Chronic: LEAD: Prolonged exposure to vapors or fumes at higher temperatures may cause respiratory irritation and systematic lead poisoning. Symptoms of lead poisoning include headache, nausea, abdominal pain, muscle and joint pain and damage to the nervous system, blood system and kidneys. SILVER: Chronic skin contact or ingestion of silver powder, salts or fume can result in a condition known as Argyria, a condition with bluish pigmentation of the skin and eyes. TIN: Has been shown to increase incidence of sarcoma in animal tests. WARNING: This product can expose you to chemicals including [lead] which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov NOTE: The Indium Corporation does not recommend, manufacturer, market or endorse any of its products for human consumption. WARNING: This product may contain lead. Lead may be harmful to your health. US Federal law prohibits the use of leaded solders in making joints or fittings in any private or public water supply system. Keep out of the reach of children. ALLOY TABLE: (LEAD/ANTIMONY) INDALLOY %LEAD %ANTIMONY LIQUIDUS SOLIDUS DENSITY oC/oF (gm/cm3) Pb Sb 143 90 10 260/500 252/486 10.60 157 95 5 295/563 252/486 10.96 168 98 2 320/608 300/572 11.19 169 98.5 1.5 322/612 310/590 11.23 NS 96 4 - 11.03 ALLOY TABLE: (TIN/LEAD/ANTIMONY/SILVER) INDALLOY %TIN %LEAD %ANTIMONY %SILVER LIQUIDUS DENSITY oC/oF Sn Pb Sb Ag 119 50 49.5 0.5 - 216/421 8.85 126 40 58 2 - 231/448 9.17 134 35 63.2 1.8 - 243/469 9.39 138 30 68.4 1.6 - 250/482 9.63 144 25 73.7 1.3 - 263/505 9.88 152 5 92 3 - 285/545 10.82 233 5 85 10 - 255/491 10.36 236 5 83 10 2 247/477 10.35 NS 5 92.5 0.5 2 - 10.99 NS 10 75 15 - 9.76 NS 10 80 10 - 10.07 NS 25 74.65 0.35 - 9.94 NS = NON STANDARD ALLOY MIX ALLOY TABLE: (LEAD/ANTIMONY/SILVER) INDALLOY %LEAD %ANTIMONY %SILVER - LIQUIDUS DENSITY oC/oF NS 92.5 5 2.5 - 10.94 ALLOY TABLE: (LEAD/ANTIMONY/TIN) INDALLOY %LEAD %ANTIMONY %TIN DENSITY NS 36.65 0.35 63 8.38 NS 52.3 2.7 45 8.93 NS 69 0.5 30.5 9.67 NS = Non Standard Mix