Note: Ingredients listed on restricted chemical lists
EC/CAS
231-141-8/7440-31-5
Name of the chemical
Organometallic tin
Concentration
73.8-88
EC/CAS
231-131-3/7440-22-4
Name of the chemical
Silver
Concentration
0-3.4
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
0-0.89
EC/CAS
231-146-5/7440-36-0
Name of the chemical
Antimony
Concentration
0-4.9
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
7440-69-
EC/CAS
143-24-8
Name of the chemical
Bis(2-(2-methoxyethoxy)ethyl)ether; Tetraethylenglycoldimethylether (2020/1182)
Concentration
0.75-1.2
General Information
Version
1.1
Revision date
2021-11-02
Product name
INDALLOY WITH INDIUM 10.1 FLUX (Lead free)
1.2.1 Relevant identified uses
Industrial Use (mixture) - solder paste consisting of a flux vehicle blended with 82-89 weight percent pre-alloyed metal powder. See alloy table for metal mixtures with the same flux
Manufacturer Name
In America
Emergency telephone
1 (800) 424-9300, +1 (703) 527-3887, (86) 512-6283-4900, +65 6268-8678, +91-044-46877888
Icons in SDS
Company Information
company name
In America
e-mail address of the competent person responsible for the Safety Data Sheet
mkinne@indium.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H334, H360
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
H360
May damage fertility or the unborn child
Section 2
SECTION 2: Hazards identification
Principle Routes of Exposure
Carcinogen listed in ⊕Eye ⊕Inhalation ⊕Skin ⊕Ingestion NTP IARC
Precautionary statements
P233 Keep container tightly closed P261 Avoid breathing dust/fume/gas/mist/vapours/spray P270 Do not eat, drink or smoke when using this product P273 Avoid release to the environment P280 Wear protective gloves/protective clothing/eye protection/face protection P362 +P364 Take off contaminated clothing and wash before reuse P301 + P314 IF SWALLOWED: Get Medical attention/advice if you feel unwell P302 +P352 IF ON SKIN: Wash with plenty of soap and water P304 + 341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing P305 + 351 IF IN EYES: Rinse continuously with water for several minutes (15 mins) See alloy table listings
Potential health effects
Eye Contact: Contact with material at room temperature or fume from material at typical re-flow temperatures over 100°C may cause serious eye irritation. Ingestion: This product contains metal alloy powders and organic chemicals. May be harmful if swallowed. Inhalation: Vapors or fumes from this material at typical re-flow temperatures over 100°C may cause local irritation to the respiratory system. May be harmful if inhaled. Inhalation of rosin fume may cause occupational asthma. Skin Contact: May cause skin irritation. Rosin may cause dermatitis and skin sensitization. Chronic: SILVER: Chronic skin contact or ingestion of silver powder, salts or fume can result in a condition known as Argyria, a condition with bluish pigmentation of the skin and eyes. TIN: Has been shown to increase incidence of sarcoma in animal tests. COPPER: Overexposure to fumes of copper may cause metal fume fever (chills, muscle aches, nausea, fever; dry throat, cough, weakness, lassitude); metallic or sweet taste; discoloration of skin and hair. ANTIMONY: May be harmful if inhaled. May cause respiratory irritation. WARNING: This product can expose you to chemicals including [trace amounts of lead] which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Note: The Indium Corporation does not recommend, manufacture, market or endorse any of its products for human consumption.
2.1 Classification of the substance or mixture
Classification: Skin sensitizer-Category 1B Respiratory sensitizer-Category 1B Reproductive toxicity-Category 1B GHS