Note: Ingredients listed on restricted chemical lists
EC/CAS
231-100-4/7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
N/A
EC/CAS
231-146-5/7440-36-0
Name of the chemical
Antimony
Concentration
N/A
General Information
Version
1.1
Revision date
2021-01-11
Product name
INDALLOY WITH INDIUM 10.1 FLUX (Lead containing)
1.2.1 Relevant identified uses
Industrial Use (mixture) - solder paste consisting of a flux vehicle blended with 82-89 weight percent pre-alloyed metal powder. See alloy table for metal mixtures with the same flux
Manufacturer Name
In America
Emergency telephone
1 (800) 424-9300, +1 (703) 527-3887, (86) 512-6283-4900, +65 6268-8678
Icons in SDS
Company Information
company name
In America
e-mail address of the competent person responsible for the Safety Data Sheet
nswarts@indium.com
GHS Information
Signal word
WARNING
Hazard Codes
Hazard statements (CLP)
H317, H334, H360FD, H362, H372
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
H360FD
May damage fertility. May damage the unborn child.
H362
May cause harm to breast-fed children
H372
Causes damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
Principle Routes of Exposure
Carcinogen listed in Eye Inhalation Skin Ingestion NTP IARC
Precautionary statements
P233 Keep container tightly closed P261 Avoid breathing dust/fume/gas/mist/vapors/spray P263 Avoid contact during pregnancy/while nursing P270 Do not eat, drink or smoke when using this product P273 Avoid release to the environment P280 Wear protective gloves/protective clothing/eye protection/face protection P362 +P364 Take off contaminated clothing and wash before reuse P301 +P314 IF SWALLOWED: Get Medical advice/attention if you feel unwell P302 +P352 IF ON SKIN: Wash with plenty of soap and water P304 + P341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing P305 + P351 IF IN EYES: Rinse continuously with water for several minutes (15 mins) See alloy table listing.
Potential health effects
Eye Contact: Contact with material at room temperature or fume from material at typical re-flow temperatures over 100°C may cause serious eye irritation. Ingestion: This product contains metal alloy powders and organic chemicals. May be harmful if swallowed. Inhalation: Vapors or fumes from this material at typical re-flow temperatures over 100°C may cause local irritation to the respiratory system. May be harmful if inhaled. Inhalation of rosin fume may cause occupational asthma. Skin Contact: May cause skin irritation. Rosin may cause dermatitis and skin sensitization. Chronic: TIN: Has been shown to increase incidence of sarcoma in animal tests. LEAD: Prolonged exposure to vapors or fumes at higher temperatures may cause respiratory irritation and systematic lead poisoning. WARNING: This product may contain lead. Lead may be harmful to your health. US Federal law prohibits the use of leaded solders in making of joints in any private or public potable (drinking) water supply system. Keep out of the reach of children. WARNING: This product can expose you to chemicals including [lead] which is known to the State of California to cause cancer, and can cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Note: The Indium Corporation does not recommend, manufacture, market or endorse any of its products for human consumption.
2.1 Classification of the substance or mixture
Classification: Repr. 1A: H360FD; Lact.: H362,* STOT RE 1; H372 Reproductive toxicity- Category 1A Skin sensitizer-Category 1B Respiratory sensitizer-Category 1B Reproductive toxicity – Effects on or via lactation Specific target organ toxicity- repeated exposure- Category 1 GHS