Note: Ingredients listed on restricted chemical lists
EC/CAS
215-676-4/1341-49-7
Name of the chemical
Ammonium hydrogendifluoride
Concentration
17.92-18.87
EC/CAS
205-483-3/141-43-5
Name of the chemical
2-aminoethanol
Concentration
N/A
General Information
Revision date
2018-02-19
Product name
INDALLOY FLUX 3
1.2.1 Relevant identified uses
Industrial Use - Paste Flux for soldering applications
Manufacturer Name
In America
Emergency telephone
1 (800) 424-9300, +1 (703) 52...
Icons in SDS
Company Information
company name
In America
e-mail address of the competent person responsible for the Safety Data Sheet
nswarts@indium.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H314, H317, H335, H341, H361, H373, H411
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
Signal word
Danger
Hazard statements
H302 Harmful if swallowed H314 Causes severe skin burns and eye damage H317 May cause an allergic skin reaction H335 May cause respiratory irritation H341 Suspected of causing genetic defects H361 Suspected of damaging fertility or the unborn child H373 May cause damage to organs through prolonged or repeated exposure H411 Toxic to aquatic life with long lasting effects
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapors/spray P270 Do not eat, drink or smoke when using this product P273 Avoid release to the environment P280 Wear protective gloves/protective clothing/eye protection/face protection P362 Take off contaminated clothing and wash before reuse P301 + P314 IF SWALLOWED: Get Medical advice/attention if you feel unwell P302 +P352 IF ON SKIN: Wash with plenty of soap and water P304 + 341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing P305 + 351 IF IN EYES: Rinse continuously with water for several minutes (15mins) Acute toxicity (oral) – Cat 4 Acute toxicity- (inhalation) – Cat 4 Skin corrosion – Cat 1B Skin sensitivity- Cat 1 Aquatic (chronic) – Cat 2 Reproductive toxicity – Cat 2 Mutagenicity- Cat 2 Specific target organ, single exposure, respiratory- Cat 2
Potential health effects
Eye Contact Irritating to the eyes. May cause burns to the eyes. Ingestion Inhalation Skin Contact Harmful if swallowed. Heated vapor concentrations may be harmful if inhaled. Severe irritant to respiratory tract can occur. May cause severe irritation. Causes burns with direct contact. Chronic Eyes: Prolonged contact might cause more severe burns. Skin: Prolonged contact might cause more severe Ingestion: May cause osseous fluorosis (increased radiographic density of the bones). May cause kidney damage, asthma and symptoms resembling rheumatism. Inhalation: Not determined Target organ: Chronic ingestion may cause kidney damage. May aggravate an existing dermatitis. Long term over exposure to inorganic tin compound can cause a benign dust-induced lung condition, called Stannosis. Usually this condition does not interfere with normal lung function. EMERGENCY OVERVIEW DANGER Harmful is swallowed. Causes severe burns. Avoid physical contact with eyes, mucous membranes and skin. CONTAINS FLUORIDES AND ZINC CHLORIDES. Do not take internally. Soldering may produce fumes and gases. Prolonged or repeated over-exposure by skin contact may cause dermatitis. Use adequate ventilation. KEEP OUT OF THE REACH OF CHILDREN. NOTE The Indium Corporation does not recommend, manufacture, market or endorse any of it's product's for human consumption