New and Improved Step 2

Hazard statements (CLP)

H222, H280, H304, H312, H315, H336

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

GHS Classification in Accordance with 29 CFR 1910 (OSHA HCS): Classification of the Substance or Mixture

Signal word

DANGER DANGER

Hazard statements

H222 - Extremely flammable aerosol H280 - Contains gas under pressure; may explode if heated H304 - May be fatal if swallowed and enters airways H312 - Harmful in contact with skin H315 - Causes skin irritation H336 - May cause drowsiness or dizziness P210 - Keep away from heat/sparks/open flames/hot surfaces. P211 - Do not spray on an open flame or other ignition source. P251 - Do not pierce or burn, even after use. P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P264 - Wash skin thoroughly after handling. P264 - Wash thoroughly after handling. P271 - Use only outdoors or in a well-ventilated area. P280 - Wear protective gloves/ protective clothing/ eye protection/ face protection. H222 - Extremely flammable aerosol H280 - Contains gas under pressure; may explode if heated H304 - May be fatal if swallowed and enters airways H312 - Harmful in contact with skin H315 - Causes skin irritation H336 - May cause drowsiness or dizziness

Product definition

New and Improved Step 2 SDS Number: IMS 06-954-12 Product Code: 142939 Revision Date: 11/17/2022 Version: 2 Product Type: Aerosol Mold Protector Supplier Details: Eveready Products Corp 1101 Belt Line Cleveland, Ohio 44109 Phone: 216-661-2755 Emergency: Chemtel 1-800-255-3924 NOTE: The information contained herein is accurate to the best of our knowledge. We do not suggest or guarantee that any hazards listed herein are the only ones which exist. We provide this information as guidance for providing personal protection to your employees. The user has the sole responsibility to determine the suitability of the materials for any use and the manner of use contemplated. The user must meet all applicable safety and health standards. We provide this information as guidance for providing personal protection to your employees. 2

Precautionary statements

P210 - Keep away from heat/sparks/open flames/hot surfaces. P211 - Do not spray on an open flame or other ignition source. P251 - Do not pierce or burn, even after use. P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P264 - Wash skin thoroughly after handling. P264 - Wash thoroughly after handling. P271 - Use only outdoors or in a well-ventilated area. P280 - Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P310 - IF SWALLOWED: Immediately call a POISON CENTER/doctor. P302 + P352 - IF ON SKIN: Wash with plenty of soap and water. P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 - Call a POISON CENTER or doctor/ physician if you feel unwell. P330 - Rinse mouth. P331 - Do NOT induce vomiting. P332 + P313 - If skin irritation occurs: Get medical advice/attention. P362 + P364 - Take off contaminated clothing and wash it before reuse. P370 + P378 - In case of fire: Use dry sand, dry chemical or alcohol-resistant foam for extinction. P403 + P235 - Store in a well-ventilated place. Keep cool. P410 + P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P501 - Dispose of contents/container in accordance with local/regional regulations.

2.1 Classification of the substance or mixture

GHS Classification in Accordance with 29 CFR 1910 (OSHA HCS): Physical, Flammable Aerosols, 1 Physical, Gases Under Pressure, Liquefied Gas Health, Aspiration hazard, 1 Health, Acute toxicity, 4 Dermal Health, Skin corrosion/irritation, 2 Health, Specific target organ toxicity - Single exposure, 3